@ -1340,43 +1340,43 @@ The input signal on the control card is not assigned
#### 1.5.1.81 81 [ECAT.16.1] TILTER VACUUM 1 IN PRESSURE
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and move the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and flipping the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
#### 1.5.1.82 82 [ECAT.16.2] TILTER VACUUM 2 IN PRESSURE
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and move the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and flipping the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
#### 1.5.1.83 83 [ECAT.16.3] TILTER VACUUM 3 IN PRESSURE
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and move the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and flippinf the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
#### 1.5.1.84 84 [ECAT.16.4] TILTER VACUUM 4 IN PRESSURE
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and move the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and flipping the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
#### 1.5.1.85 85 [ECAT.16.5] TILTER VACUUM 5 IN PRESSURE
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and move the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and flipping the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
#### 1.5.1.86 86 [ECAT.16.6] TILTER VACUUM 6 IN PRESSURE
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and move the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and flipping the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
#### 1.5.1.87 87 [ECAT.16.7] TILTER VACUUM 7 IN PRESSURE
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and move the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and flipping the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
#### 1.5.1.88 88 [ECAT.16.8] TILTER VACUUM 8 IN PRESSURE
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and move the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
The input signal from the vacuum monitoring sensor on the suction cups indicates whether there is a vacuum present or not. If the vacuum is created on a suction cup, it is possible to lift and flipping the material on the workbench. If not, a signal will appear to check the suction cup with the number where there is no vacuum.
#### 1.5.1.89 89 [ECAT.16.9] TILTER AT 0A°
The input signal from the position sensor of the additional vacuum suction cups. The suction cups are raised and the machine can perform cutting and milling work.
The input signal comes from the position sensor of the additional vacuum suction cups. The suction cups are lifted and rotated to flip the material.
#### 1.5.1.90 90 [ECAT.16.10] TILTER AT 180A°
The input signal from the position sensor of the additional vacuum suction cups. The suction cups are lowered and the machine can perform work on moving the material on the workbench.
The input signal from the position sensor of the additional vacuum suction cups. The suction cups are lowered and the machine can perform work on flipping the material on the workbench.
#### 1.5.1.91 91 [ECAT.16.11] FLIPPER SAFETY
@ -1408,12 +1408,20 @@ The input signal on the control card is not assigned
#### 1.5.1.97 REMOTE SPD+
The input signal is a change in the speed of the spindle as a percentage of its initial speed.
#### 1.5.1.98 REMOTE BLADE ON
Input signal for turning on the spindle from the remote control
#### 1.5.1.99 REMOTE SPD-
The input signal is used to reduce the speed of the spindle as a percentage of its initial speed.
#### 1.5.1.100 REMOTE CONFIRM
The input signal for connecting the remote control
#### 1.5.1.101 REMOTE Y+
An input signal to enable the movement of the machine in a positive direction along the Y-axis using the remote control.
@ -1449,7 +1457,7 @@ An input signal to enable the movement of the machine in a positive direction al
### 1.5.2 OUTPUT (1-32)
A tab with the output signals from the main modules and components of the machine. The operator can use this tab to check the operation of selected commands, see how the machine is performing, and, if necessary, make adjustments.
A tab with the output signals from the main modules and components of the machine. The operator can use this tab to check the operation of selected commands, see how the machine is performing, and, if necessary, make adjustments.Care must be taken when using the output signals, because the commands are forced and do not match the safe positions of the machine.
#### 1.5.2.1 01 [ECAT.13.01] ENABLE MACHINE
@ -1461,6 +1469,8 @@ Resets (reboots) the camera used for taking images of material on the workbench.
#### 1.5.2.3 03 [ECAT.13.03] WATERJET ENABLE
Activates the water jet. This signal is also given when the machine is turned on from the operator's menu.
#### 1.5.2.4 04 [ECAT.13.04] VACUUM PUMP
Activates the vacuum pump, creating a vacuum in the system. This signal is necessary for testing all vacuum suction cups. Each suction cup can be tested individually by activating its respective output signal.
@ -1475,14 +1485,20 @@ Activates the automatic lubrication pump. The pump normally operates at set inte
