|
|
# 1 AitalMAC UI
|
|
|
|
|
|
|
|
|
|
|
|
The software interface is divided into distinct sections, each serving a specific purpose. Below is a breakdown of the main components:
|
|
|
|
|
|
- **1.1 Connect window**
|
|
|
- **Connection Status**: Enables users to connect to the CNC controller.
|
|
|
- **Behavior**: When the software connects to the CNC controller automatically at startup, this page is skipped, and users are taken directly to the manual interface.
|
|
|
- **Activity Bar (Left Side)**
|
|
|
|
|
|
**The Activity Bar** is a vertical panel located on the left side of the interface. It is used to switch between different pages or activities within the software, each corresponding to a specific function or operation of the CNC machine.
|
|
|
|
|
|
- **1.2 Manual**: Access the manual control page for direct machine manipulation and jogging.
|
|
|
- **1.3 Auto**: Switch to automatic operation, where preprogrammed toolpaths are executed.
|
|
|
- **1.4 MDI (Manual Data Input)**: Input and execute G-code commands manually.
|
|
|
- **1.5 I/O:** Monitor digital Input/Output signals of the machine and view machine working hours.
|
|
|
- **1.6 Parameters**: Navigate to the parameters page for configuring machine settings and system variables.
|
|
|
- **1.7 Tools:** Access Tool Manager, where you can create tools, set feeds and speeds for manual operations, and configure tool offsets.
|
|
|
- **1.8 Others:** Various additional tools are available, most notably the Remote Control settings.
|
|
|
- **1.9 Machine:** This button enables/disables machine operations. Colors indicate enabled state. Machine faults prevent activation and display errors.
|
|
|
- **1.10** **Status and Control Panel**
|
|
|
- **3D Preview**: Displays a visual representation of the machine or toolpath, aiding in real-time monitoring.
|
|
|
- **Machine Position and Torque Information**: Numerical or graphical data about the machine's current position and applied torque.
|
|
|
- **Message log area:** Displays system messages, errors, and warnings for easy troubleshooting and status updates.
|
|
|
- **1.11 Bottom Toolbar**
|
|
|
|
|
|
The bottom section of the interface features a toolbar displaying key information about the current machine state:
|
|
|
|
|
|
- **Loaded Tool**: Indicates the currently loaded tool in the CNC machine.
|
|
|
- **Other Info**: May include machine status, active program, or system warnings.
|
|
|
|
|
|
|
|
|
## 1.1 Connect window
|
|
|
|
|
|
|
|
|
|
|
|
The **Connection Window** appears when the software starts up and cannot automatically connect to the CNC controller. It allows users to establish communication between the software and the CNC controller.
|
|
|
|
|
|
- **Purpose**: Ensures that the software can connect to the CNC controller hardware before proceeding to other activities.
|
|
|
- **Behavior**:
|
|
|
- If a connection is successfully established at startup, this page is bypassed, and the user is taken directly to the manual interface.
|
|
|
- If the connection fails, this page remains active, providing the user with options to retry the connection or exit the program.
|
|
|
|
|
|
### 1.1.1 IP Address
|
|
|
|
|
|
The text input field to enter the network IP address of the CNC machine for establishing a connection.
|
|
|
|
|
|
- **Default Value**: The default IP address for a single AitalMAC machine is **192.168.50.152** (for machines within a line, this increments for each machine—153, 154, and so on)
|
|
|
|
|
|
### 1.1.2 Port
|
|
|
|
|
|
The numerical input field to specify the port number required for the connection.
|
|
|
|
|
|
- **Default Value**: The default port for AitalMAC machines is **9888**.
|
|
|
|
|
|
### 1.1.3 Connect
|
|
|
|
|
|
The button to initiate the connection process using the details entered in the **IP Address** and **Port** fields.
|
|
|
|
|
|
### 1.1.4 Exit
|
|
|
|
|
|
The button to close the program.
|
|
|
|
|
|
## 1.2 Manual
|
|
|
|
|
|
|
|
|
|
|
|
The **Manual Page** provides direct access to machine operations and motion control. This interface enables operators to manually control various basic machine functions.
|
|
|
|
|
|
### 1.2.1 General
|
|
|
|
|
|
The **General** control tab provides buttons for executing common machine functions.
|
|
|
|
|
|
### 1.2.2 Spindle
|
|
|
|
|
|
The **Spindle** control tab allows operators to:
|
|
|
|
|
|
- The spindle power button activates the rotation according to the settings specified in the tool's database, which is connected to the machine. This button is essential for the machine to function in manual mode, controlled by the operator.
|
|
|
- A button to change the direction of rotation of the spindle is provided. It can be set to rotate clockwise or counterclockwise, depending on the needs of the operator and the specific cutting tool being used. This feature is essential for proper operation of certain cutting tools, as it affects the direction of threaded fixation and the sharpening of cutting edges. The button is intended for manual use by the operator of the machine.
|
|
|
|
|
|
### 1.2.3 Water Jet
|
|
|
|
|
|
The **Water Jet** control tab provides controls to:
|
|
|
|
|
|
- Raise and lower the water jet nozzle.
|
|
|
- Start and stop the high-pressure pump.
|
|
|
|
|
|
### 1.2.4 Options
|
|
|
|
|
|
The **Options** control tab includes buttons for additional machine functions.
|
|
|
|
|
|
### 1.2.5 Output
|
|
|
|
|
|
The **Output** control tab manages water-related systems:
|
|
|
|
|
|
- Operate the main water supply valve.
|
|
|
- Activate auxiliary water systems.
|
|
|
- Control cooling system water flow.
|
|
|
|
|
|
### 1.2.6 Joint
|
|
|
|
|
|
The **Joint Override** control tab allows operators to bypass axis limit sensors and move beyond axis limits.
|
|
|
|
|
|
- **Note**: This function should only be used with caution by authorized personnel.
|
|
|
|
|
|
### 1.2.7 Main Manual Machine Controls
|
|
|
|
|
|
This section contains primary machine control buttons, enabling operators to:
|
|
|
|
|
|
- Move the machine along all axes.
|
|
|
- Operate table controls, such as lifting and lowering.
|
|
|
- Use the vacuum lifter for slabs.
|
|
|
- Park the machine along the B and C axes.
|
|
|
|
|
|
### 1.2.1 General
|
|
|
|
|
|
The **General** control tab provides buttons for executing common machine functions:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.2.1.1 Home All
|
|
|
|
|
|
The **HOME ALL** function moves all machine axes to their reference (home) positions.
|
|
|
|
|
|
- For machines equipped with motors featuring absolute encoders (which is the case for most AitalMAC machines), the home position is provisional.
|
|
|
- The provisional home position will be overwritten by the absolute encoder position when the **Machine On** button is pressed.
|
|
|
|
|
|
#### 1.2.1.2 Unhome All
|
|
|
|
|
|
Clears the homed status of all machine axes.
|
|
|
|
|
|
#### 1.2.1.3 Change Tool
|
|
|
|
|
|
opens up tool list window, allowing user to switch the currently active tool.
|
|
|
|
|
|
|
|
|
|
|
|
##### 1.2.1.3.1 Tool List
|
|
|
|
|
|
A panel of tools that are stored in memory and that the machine uses to operate.
|
|
|
|
|
|
##### 1.2.1.3.2 Remove Tool
|
|
|
|
|
|
This button initiates a tool change operation to unload the currently used tool from the machine. On AitalMAC base model saws, which do not have automatic or manual tool change stations, the tool will simply be removed from memory. For machines equipped with tool stations or positions, the automatic tool change routine will be executed to remove the current tool.
|
|
|
|
|
|
##### 1.2.1.3.3 Exit
|
|
|
|
|
|
Button to exit the tool selection panel.
|
|
|
|
|
|
##### 1.2.1.3.4 Choose Tool
|
|
|
|
|
|
This button activates the selected tool from the tool list for use on the machine. On AitalMAC base model saws, which lack automatic or manual tool change stations, the tool will be loaded into memory as the current tool. For machines equipped with tool stations or positions, the automatic tool change routine will be executed to load or exchange the current tool with the selected tool from the list.
|
|
|
|
|
|
---
|
|
|
|
|
|
#### 1.2.1.4 Parking
|
|
|
|
|
|
This button moves the machine to a designated "parking" position as defined in the parameters. Parking is not always safe, particularly when the machine is engaged with the material, such as during a 45-degree miter cut. Always ensure the machine is in a safe state before initiating the parking operation.
|
|
|
|
|
|
#### 1.2.1.5 Touch Off
|
|
|
|
|
|
Moves the machine origin reference point to the current tool position, effectively redefining the machine’s working coordinates.
|
|
|
|
|
|
#### 1.2.1.6 Clean Touch Off
|
|
|
|
|
|
Resets or removes the current touch-off reference point.
|
|
|
|
|
|
#### 1.2.1.7 Edit Tool
|
|
|
|
|
|
Opens a dialog to modify currently loaded main tool parameters.
|
|
|
|
|
|
|
|
|
|
|
|
**Introduction to Tool Management**
|
|
|
|
|
|
The tool management system in the AitalMAC application is inherited from AitekCAM, a CNC Stone Machining Center application initially developed for routing operations and later extended to include blade functionality. To maintain compatibility, AitalMAC still allows tools to be synced with AitekCAM. However, the way tool parameters are used differs significantly between the two systems.
|
|
|
|
|
|
In AitekCAM, parameters like tool types play a central role in defining the behavior of programs created within the CAM environment. These parameters influence the operation paths, machining logic, and other critical aspects of toolpath generation. In contrast, AitalMAC uses tool types primarily to manage conflicts between tools and operations. For example, in AitalMAC, users can only access the "X-Y Cut" page—designed specifically for blade tools—if the primary loaded tool is of the blade type. In this context, tool types help ensure logical compatibility between operations and tool assignments rather than defining program behavior.
|
|
|
|
|
|
It is important to recognize that many of these parameters are influenced by the history of development. As a result, some parameters may appear unnecessary or out of place unless this historical context is considered. For instance, parameters like speeds and feeds are heavily utilized in AitalMAC, while others, such as "safe position," are included solely for compatibility with AitekCAM, where they are still actively used. Understanding this distinction can help users better navigate and make sense of the tool management system in AitalMAC.
|
|
|
|
|
|
##### 1.2.1.7.1 Basic
|
|
|
|
|
|
The **Basic** tab contains the essential parameters required to define a valid tool. These include the tool's name, type, number, position in the tool change sequence, diameter, and axis offsets. These parameters ensure the tool is accurately recognized for operation.
|
|
|
|
|
|
|
|
|
|
|
|
###### 1.2.1.7.1.1 Name
|
|
|
|
|
|
The **Name** field specifies the unique identifier for the tool. It serves as a label to easily recognize and distinguish the tool. The name should be descriptive enough to provide clarity about the tool's purpose or type (e.g., "Finber Bit 20mm" or "Saw Blade Marble 450mm"). Proper naming conventions ensure smooth operation, especially when managing multiple tools.
|
|
|
|
|
|
###### 1.2.1.7.1.2 Tool Number (T)
|
|
|
|
|
|
The **Tool Number (T)** is a unique identifier used by the machine's logic to manage and reference tools during operations. The program ensures this number is unique. If a duplicate tool number is entered, an error will occur, and the program will automatically compile and assign the next viable unique number before saving the tool. This prevents conflicts and ensures accurate tool handling in the machining process.
|
|
|
|
|
|
###### 1.2.1.7.1.3 Type
|
|
|
|
|
|
This field allows you to select the type of tool being used in the operation from a dropdown list. Available options include tools such as a drill, blade, finger bit, and others. The selected tool type is validated to ensure compatibility with the operation being performed. For instance, a probing operation requiring a finger bit will check that the second loaded tool is not a blade, as using an incorrect tool could lead to unexpected behaviors or errors.
|
|
|
|
|
|
If the wrong tool type is detected, the machine will stop and display an error message. This system safeguards against potential issues, maintaining safety and operational precision. Maintaining consistency between AitalMAC and Pegasus applications by matching tool types is strongly recommended, as future updates to AitalMAC may introduce similar restrictions, such as specific tool requirements for functions like drilling holes.
|
|
|
|
|
|
**Tool Types in the Dropdown List:**
|
|
|
|
|
|
- **Profiling**: Tools used by CNC Machining Centers to shape the edges of the stone. This type is included for AitekCAM compatibility purposes.
|
|
|
- **Drill**: Commonly used for creating cylindrical holes in materials. Drills are allowed as secondary tools in the AitalMAC application and can also be used in Pegasus to program drilling hole strategies, particularly for finishing concave corners that cannot be reached by a blade. It is recommended to maintain consistency by explicitly setting drills as such in both AitalMAC and Pegasus applications.
|
|
|
- **Water Slot**: Also known as calibration wheels, these tools are included for AitekCAM compatibility purposes. Operators will often set tools of this type due to their distinct appearance compared to a finger bit. While there are no strict limitations within the AitalMAC application, consistency with AitekCAM ensures smooth operation.
|
|
|
- **Tap**: Deprecated and maintained for legacy machines only.
|
|
|
- **Blade**: Ensures compatibility for cutting tasks that require tools classified as "blade" type. The AitalMAC application enforces strict limitations, allowing only tools of this type to perform certain operations to ensure precision and safety. Properly selecting the tool type aligns the application’s operations with the intended tool usage, minimizing risks and maximizing efficiency. Although Pegasus and AitalMAC applications operate independently without strict integration, maintaining consistency in tool type settings across both systems is highly recommended. This practice simplifies workflows and ensures readiness for future updates and improvements to both applications.
|
|
|
- **Finger Bit**: Commonly used for CNC Machining Centers to cut sinks out, this tool type is also included for compatibility with AitekCAM rather than serving any specific function within the AitalMAC application. It is not recommended as the secondary tool for bridge saws, as the hollow finger bit tool type is better suited for such tasks, ensuring optimal compatibility and performance.
|
|
|
- **Groove Bit**: Maintained solely for compatibility with AitekCAM, as even the slope program within AitalMAC does not require this type of tool.
|
|
|
- **Hollow Finger Bit**: This is the correct type for the secondary tool for AitalMAC saw machines. Choose this type rather than the Finger Bit, as it is better suited for the type of processing performed by Pegasus, which runs steps in a spiral fashion. It validates tools for creating hollowed or recessed features in the material.
|
|
|
|
|
|
###### 1.2.1.7.1.4 Position
|
|
|
|
|
|
This setting specifies the position of the tool within the machine's magazine. On machines equipped with an automatic tool change function, the available positions are typically numbered, such as 1 to 27. These numbered positions correspond to the pockets in the magazine.
|
|
|
|
|
|
- **Position 0**: Reserved for manual tool changes. When a tool is assigned to Position 0, the machine will move to the manual tool change position and await user confirmation after the tool change is completed. This behavior is consistent regardless of whether the current and requested tool are both assigned to Position 0.
|
|
|
- **Positions 1 to 27**: These positions are used for automatic tool changes. If two tools are assigned to the same position, the tool change sequence is skipped because it is interpreted as stacked tools. This allows seamless transitions without requiring additional tool change operations.
|
|
|
- **Positions 28 and Higher**: These positions are also reserved for manual tool changes. However, unlike Position 0, if two tools share the same position number, the tool change sequence is skipped as it is interpreted as stacked tools.
|
|
|
|
|
|
It is important to note that Position 0 has unique behavior: the machine always moves to the manual tool change position and waits for user confirmation, even if the current and requested tool are both in Position 0. For positions beyond the magazine's automatic range (e.g., 28 and higher), the tool change sequence behaves similarly to stacked tools, skipping the sequence when tools share the same position number.
|
|
|
|
|
|
###### 1.2.1.7.1.5 CNC Diameter
|
|
|
|
|
|
The CNC diameter is a view-only field showing the calculated diameter used for tool radius compensation (e.g., G41-G42), commonly applied when running tools along the edge of the material on CNC machining centers. It is derived as:
|
|
|
|
|
|
**CNC Diameter = Diameter + (Removal × 2)**
|
|
|
|
|
|
The "Removal" value, specified in the "Extend" tab, adds an offset to the tool radius to leave surplus material for subsequent tools in a multi-step grinding process. Each tool in the sequence progressively removes material, refining the surface left by the previous tool. Only the final tool, with no "Removal" offset, grinds the material to the programmed finished size using its actual measured diameter.
|
|
|
|
|
|
When probing the tool diameter on CNC machining centers, the machine will adjust both CNC and base diameters while keeping the "Removal" constant.
|
|
|
|
|
|
It is important to note that on 5-axis bridge saw machines, which predominantly use blade saw tools operating vertically and approaching the material from the top, removal offsets are not applied to depth. Removal compensation (via G41-G42) works exclusively on the XY plane, where the spindle approaches horizontally, as is typical for CNC machining centers. For 5-axis bridge saws, removal compensation is not applicable to either edge or depth, as the nature of the cutting process differs significantly from CNC machining centers.
|
|
|
|
|
|
###### 1.2.1.7.1.6 Diameter
|
|
|
|
|
|
This is the actual, physical diameter of the tool as measured and entered by the operator when installing a new tool. The base diameter serves as the foundation for calculating the CNC diameter and represents the real dimensions of the tool itself. It ensures accurate toolpath calculations and material removal during machining processes.
|
|
|
|
|
|
###### **1.2.1.7.1.7 Zoffset**
|
|
|
|
|
|
This offset is applied along the Z axis using G43 and removed with G49, subtracting the tool’s offset from the current axis position. In most CNC machining centers with vertical spindles, tool length compensation occurs on the Z axis. However, on AitalMAC 5-axis bridge saws (and similar 5-axis machines), the tool length is compensated on the W axis, which runs parallel to the spindle’s pivot.
|
|
|
|
|
|
###### 1.2.1.7.1.8 Aoffset.
|
|
|
|
|
|
This offset applies to the A axis, which is typically not used on most AitalMAC machines. Keep it set to 0.
|
|
|
|
|
|
###### 1.2.1.7.1.9 Boffset
|
|
|
|
|
|
This offset is associated with the B axis. On 5-axis bridge saws, where the B axis exists physically, *Boffset* is typically left at 0. However, on CNC machining centers—which do not actually have a B axis—*Boffset* is repurposed for tool diameter probing.
|
|
|
|
|
|
During diameter probing, the offset designated as *Boffset* is temporarily applied on the Z axis to position the tool at the correct “probing height.” This probing height differs from the normal “working height,” which is managed by *Zoffset*. Therefore, *Boffset* does **not** serve as a tool-length offset during regular cutting operations; it is used solely to set the correct probing position for diameter measurement on machines without a physical B axis.
|
|
|
|
|
|
###### 1.2.1.7.1.10 Woffset.
|
|
|
|
|
|
**Woffset** is an essential offset applied along the W axis to ensure precise cutting on 5-axis machines. It adjusts for differences in blade positioning relative to the machine’s pivot point, enabling accurate alignment during operations.
|
|
|
|
|
|
**Understanding Woffset**
|
|
|
|
|
|
Woffset is calculated using the **segment thickness** and **core thickness** of the blade. **Segment thickness** is the measurement of the cutting edge (metal-bonded diamond segment) from the material being cut, while **core thickness** refers to the blade’s steel frame that contacts the machine’s support flange. The formula for Woffset is:
|
|
|
|
|
|
Woffset = (Segment Thickness - Core Thickness) / 2 + Core Thickness
|
|
|
|
|
|
This ensures the blade is properly positioned, accounting for any asymmetry.
|
|
|
|
|
|
**Managing Woffset in Systems**
|
|
|
|
|
|
- **Without Tool Change Capability**: For 5-axis machines that do not support tool changes for CNC profiling tools, **Pegasus software automatically manages Woffset**. This automation simplifies setup and maintains precise cutting without manual adjustments.
|
|
|
- **With Tool Change Capability**: On machines equipped with tool change features, **Woffset is handled within the AitalMAC application** as the tool length offset. This applies not only to blades but also to other profiling tools. Users must accurately set and maintain Woffset in AitalMAC to ensure consistent and reliable cutting when switching tools.
|
|
|
|
|
|
**Key Considerations**
|
|
|
|
|
|
1. **Accurate Measurements**: Precisely measure segment and core thickness.
|
|
|
2. **Software Integration**: Know whether Pegasus or AitalMAC manages Woffset.
|
|
|
3. **Tool Consistency**: Update Woffset for each tool type.
|
|
|
4. **Regular Calibration**: Verify Woffset settings periodically.
|
|
|
|
|
|
Proper management of Woffset ensures high-quality and consistent cutting performance on 5-axis machines.
|
|
|
|
|
|
##### 1.2.1.7.2 Extend
|
|
|
|
|
|
The **Extend** tab provides additional parameters for advanced tool setup and operation. While some of these parameters are optional, others—such as tickness, speed and feed settings—are essential for ensuring proper tool functionality.
|
|
|
|
|
|
|
|
|
|
|
|
###### 1.2.1.7.2.1 Removal
|
|
|
|
|
|
The "Removal" is a crucial parameter that defines the additional offset added to the tool radius during CNC operations. This value is entered in the "Extend" tab and directly influences the calculation of the CNC diameter:
|
|
|
|
|
|
**CNC Diameter = Diameter + (Removal × 2)**
|
|
|
|
|
|
The primary purpose of the Removal is to leave surplus material for subsequent tools in a multi-step grinding process. Each tool in the sequence removes a layer of material, refining the surface left by the previous tool. This ensures that every tool can perform its task effectively, leading to a smooth and precise finish.
|
|
|
|
|
|
On CNC machining centers, removal is compensated by G41 and G42, which operate in the XY plane with the spindle vertical. This allows accurate edge compensation during machining. However, on 5-axis bridge saw machines, where blade tools approach the material from the top, removal does not influence depth adjustments.
|
|
|
|
|
|
Only the final tool in a grinding tool set operates without a Removal offset, using its exact diameter to achieve the programmed finished size. Proper configuration of the Removal parameter is essential for achieving precise machining results and maintaining consistent surface quality.
|
|
|
|
|
|
**Availability**: Removal is exclusively enabled for Profiling, Finger Bit, and Water Slot tool types. For all other tool types, this parameter remains inactive (greyed out).
|
|
|
|
|
|
###### 1.2.1.7.2.2 Waste
|
|
|
|
|
|
This parameter is specific to tools used in CNC machining centers and exists solely for AitekCAM compatibility purposes. "Waste" is used by AitekCAM to generate programs that compensate for tool wear at the end of a tool cycle during execution on the CNC. However, this feature has been deprecated and replaced by "Dynamic Wear," which provides more precise and adaptive compensation for tool wear. While still present for legacy support, "Waste" is no longer actively utilized in modern workflows.
|
|
|
|
|
|
**Availability**: Waste is exclusively enabled for Profiling, Finger Bit, and Water Slot tool types. For all other tool types, this parameter remains inactive (greyed out).
|
|
|
|
|
|
###### 1.2.1.7.2.3 Drilling Step
|
|
|
|
|
|
This parameter is maintained for AitekCAM legacy compatibility and specifies the peck drilling depth used in generating peck drilling programs with drill tools.
|
|
|
|
|
|
**Availability**: Drilling Step is exclusively enabled for drill-type tools. For all other tool types, this parameter remains inactive (greyed out), as it is not applicable to them.
|
|
|
|
|
|
###### 1.2.1.7.2.4 Safe Position
|
|
|
|
|
|
This parameter is included solely for compatibility with AitekCAM and does not directly operate within the AitalMAC application. It defines the distance of the tool above the material used during rapid movements within the generated program. Safe Position ensures that the tool clears the material safely when moving between machining operations, preventing collisions and optimizing workflow.
|
|
|
|
|
|
For AitalMAC Manual and Semi-Auto operations, the equivalent parameter is the Safe Z parameter, which is located in the Parameters page, not within the tool edit window where Safe Position is configured. This distinction ensures clarity in how these parameters are applied within their respective contexts.
|
|
|
|
|
|
###### 1.2.1.7.2.5 Spindle Speed (RPM)
|
|
|
|
|
|
This parameter specifies the spindle revolutions per minute (RPM) and is valid in both AitalMAC and AitekCAM applications when using this tool. The spindle speed should be set considering the tool diameter, the material to be cut, and the recommendations provided by the tool manufacturer. Adhering to the recommended speed ensures optimal performance and prevents unnecessary wear or damage to the tool and material.
|
|
|
|
|
|
###### 1.2.1.7.2.6 XY Feed
|
|
|
|
|
|
Feeding the machine along the axes when cutting. They are installed depending on the blade diameter, material, or recommended by the tool manufacturer.
|
|
|
|
|
|
###### 1.2.1.7.2.7 Z PLUNGE
|
|
|
|
|
|
Feed of the machine along the Z axis when lowering into the material. They are installed depending on the blade diameter, material, or recommended by the tool manufacturer.
|
|
|
|
|
|
###### 1.2.1.7.2.8 THICKNESS
|
|
|
|
|
|
Thickness of the diamond segment on the tool.
|
|
|
|
|
|
###### 1.2.1.7.2.9 C DISTANCE
|
|
|
|
|
|
###### 1.2.1.7.2.10 K
|
|
|
|
|
|
###### 1.2.1.7.2.11 Z OSCILLATION
|
|
|
|
|
|
###### 1.2.1.7.2.12 OSCILLATION FREQUENCY
|
|
|
|
|
|
###### 1.2.1.7.2.13 Z START
|
|
|
|
|
|
###### 1.2.1.7.2.14 Z END
|
|
|
|
|
|
###### 1.2.1.7.2.15 Z REMOVAL
|
|
|
|
|
|
##### 1.2.1.7.3 Reference Image
|
|
|
|
|
|
This image displays key parameters in a standard format to help users better understand their meaning and purpose. The image serves as a visual aid for easier parameter selection and interpretation.
|
|
|
|
|
|
##### 1.2.1.7.4 Cancel
|
|
|
|
|
|
Discards the last changes made to the tool settings and closes the tool edit window.
|
|
|
|
|
|
##### 1.2.1.7.5 OK
|
|
|
|
|
|
Saves the last changes made to the tool settings and closes the tool edit window.
|
|
|
|
|
|
#### 1.2.1.8 Pick Image
|
|
|
|
|
|
Opens the window where you can use machine camera to get a picture of the workbench and workpiece.
|
|
|
|
|
|
|
|
|
|
|
|
##### 1.2.1.8.1 ADD
|
|
|
|
|
|
Add camera parameters for taking photos of material on the machine table.
|
|
|
|
|
|
##### 1.2.1.8.2 EDIT
|
|
|
|
|
|
Editing and setting camera parameters for photographing material on the machine table.
|
|
|
|
|
|
##### 1.2.1.8.3 Delete
|
|
|
|
|
|
Delete selected camera settings.
|
|
|
|
|
|
##### 1.2.1.8.4 SIZE
|
|
|
|
|
|
Selecting previously configured and saved camera parameters for photographing material on the machine table.
|
|
|
|
|
|
##### 1.2.1.8.5 ZOOM ALL
|
|
|
|
|
|
Enlarge the entire photo screen.
|
|
|
|
|
|
##### 1.2.1.8.6 START PICK PHOTO
|
|
|
|
|
|
Button for taking a photo of the table material by the machine.
|
|
|
|
|
|
##### 1.2.1.8.7 SAVE
|
|
|
|
|
|
Saving the received image from the camera.
|
|
|
|
|
|
##### 1.2.1.8.8 SAVE ORIGINAL
|
|
|
|
|
|
Saving the received image from the camera. Without using parameters to correct perspective and dimensions. Original camera image.
|
|
|
|
|
|
##### 1.2.1.8.9 POS
|
|
|
|
|
|
Position of the machine to obtain images from the camera.
|
|
|
|
|
|
##### 1.2.1.8.10 RESET
|
|
|
|
|
|
Reset button to re-acquire an image from the camera.
|
|
|
|
|
|
##### 1.2.1.8.11 EXIT
|
|
|
|
|
|
Exits the camera control window to obtain an image from the workbench.
|
|
|
|
|
|
#### 1.2.1.9 CHOOSE SECOND TOOL
|
|
|
|
|
|
Specifies a secondary tool for the manual operations.
|
|
|
|
|
|
#### 1.2.1.10 BLADE
|
|
|
|
|
|
Turns on the main spindle motor, at the speed of the loaded tool.
|
|
|
|
|
|
#### 1.2.1.11 REMOTE LIGHT
|
|
|
|
|
|
Remote connection status indicator: if the red remote control is disabled, the green remote control is connected.
|
|
|
|
|
|
#### 1.2.1.12 TCP LIGHT
|
|
|
|
|
|
Status indicator, movement of the center point of the TCP tool. If it's red, it's off, if it's green, it's on.
|
|
|
|
|
|
#### 1.2.1.13 BLADE CHECK
|
|
|
|
|
|
Enables adding the blade thickness to move distance when moving orthogonally to the blade direction in TCP mode
|
|
|
|
|
|
#### 1.2.1.14 MOVE DISTANCE
|
|
|
|
|
|
Sets the incremental distance for manual movements.
|
|
|
|
|
|
#### 1.2.1.15 STONE THICKNESS
|
|
|
|
|
|
Indicates the thickness of the material (such as stone) that the machine must take into account. Indicated by hand or measured by machine.
|
|
|
|
|
|
### 1.2.2 SPINDLE
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.2.2.1 STOP
|
|
|
|
|
|
The spindle power button activates the rotation according to the settings specified in the tool's database, which is connected to the machine. This button is essential for the machine to function in manual mode, controlled by the operator.
|
|
|
|
|
|
#### 1.2.2.2 CW
|
|
|
|
|
|
A button to change the direction of rotation of the spindle is provided. It can be set to rotate clockwise or counterclockwise, depending on the needs of the operator and the specific cutting tool being used. This feature is essential for proper operation of certain cutting tools, as it affects the direction of threaded fixation and the sharpening of cutting edges. The button is intended for manual use by the operator of the machine.
|
|
|
|
|
|
#### 1.2.2.3 -
|
|
|
|
|
|
Reducing spindle speed rpm
|
|
|
|
|
|
#### 1.2.2.4 +
|
|
|
|
|
|
Increasing spindle speed rpm
|
|
|
|
|
|
### 1.2.3 WATER JET
|
|
|
|
|
|
|
|
|
|
|
|
On this tab, you can find the main functions for configuring and checking the water jet. It can also be used for manual operation.
|
|
|
|
|
|
#### 1.2.3.1 UP
|
|
|
|
|
|
A button for lifting the water jet module after completing the work. Once lifted, the previously used tool is automatically activated on the machine.
|
|
|
|
|
|
#### 1.2.3.2 START CUT
|
|
|
|
|
|
Starting a water jet to begin cutting.
|
|
|
After pressing the button, the pump begins to build up the necessary pressure and the valve opens to allow sand to flow into the cutting head. Once a set delay time has elapsed, as specified in the machine's settings, the water jet is ready to begin cutting.
|
|
|
|
|
|
#### 1.2.3.3 DOWN
|
|
|
|
|
|
A button for lowering the water jet module. After lowering, the machine activates the water jet tool and the machine begins using the coordinate axis movement parameters according to the set tool parameters. The operator can then use the water jet in manual control mode.
|
|
|
|
|
|
#### 1.2.3.4 STOP CUT
|
|
|
|
|
|
Stopping the water jet: After pressing the button, the sand supply valve is closed and the pump is then turned off to build up water pressure in the water jet system. This allows for the necessary time for cleaning the pipes from sand and for a smooth shut-off of the system.
|
|
|
|
|
|
### 1.2.4 OPTION
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.2.4.1 CLEAN POINT
|
|
|
|
|
|
Clear the internal memory where the previous coordinates of the points are stored to create a template. This is necessary to avoid overlapping new marked points with previously marked ones.
|
|
|
|
|
|
#### 1.2.4.2 PICK POINT
|
|
|
|
|
|
Record points to create templates or necessary marks on the material. The operator receives them using a cross laser mounted on the machine, moving them along the axes to the desired location on the material. To record each point, you will need to click "Pick point".
|
|
|
|
|
|
#### 1.2.4.3 SAVE POINTS
|
|
|
|
|
|
Saving all points created by the operator using a template or on the material for further work. The dot file is synchronized by the program to create a control program, where it is also possible to import a photo of the material from the desktop.
|
|
|
|
|
|
#### 1.2.4.4 PROBE BLADE
|
|
|
|
|
|
The button for checking the diameter of the installed blade. After checking, the actual size of the blade will be recorded in the tool settings and the machine will execute commands with necessary corrections. This includes the depth of immersion into the worktable and the exit of the cut from the material, which helps to avoid collisions and incorrect cuts.
|
|
|
|
|
|
#### 1.2.4.5 PROBE FINGERBIT
|
|
|
|
|
|
The button for checking the length of the installed milling cutter is located on the machine. After checking, the actual length of the cutter will be recorded in the tool parameters, and the machine will execute commands with the necessary adjustments. This ensures that the depth of immersion into the worktable and the beginning of milling are accurate, based on the thickness of the material being processed. This helps to avoid collisions and incorrect cuts, as well as any collisions with the material being machined.
|
|
|
|
|
|
#### 1.2.4.6 PROBE STONE
|
|
|
|
|
|
Button for using a probe to study the thickness of the material to adjust the operation of the machine according to the program and in manual mode.
|
|
|
|
|
|
A button to check the thickness of the material used. Thickness adjustment is necessary for proper cutting with a blade and a water jet at an angle from 1° to 57° in order to maintain the overall dimensions of the part. For milling, this is the redefinition of the safety zone and the calculation of the material milling steps.
|
|
|
|
|
|
#### 1.2.4.7 SLAB WASH
|
|
|
|
|
|
Turning on the watering can to clean the material from dirt
|
|
|
|
|
|
A button to turn on the water pressure cleaning system. This is necessary to use a vacuum lift for flat material weighing up to 500 kg. Before using the vacuum suction cups, the operator washes the contact points of the suction cups with the material.
|
|
|
|
|
|
|
|
|
#### 1.2.4.8 VACUUM PUMP
|
|
|
|
|
|
A button to turn on the vacuum pump. When the pump is turned on, a suction force is created on the suction cups to lift and then move the material.
|
|
|
|
|
|
#### 1.2.4.9 LASER
|
|
|
|
|
|
The laser line corresponds to the direction of the cutting blade and helps the operator to adjust the cutter to cut the material at the desired location.
|
|
|
|
|
|
### 1.2.5 OUTPUT
|
|
|
|
|
|
|
|
|
|
|
|
A tab with output signals for various machine functions. The operator can use these signals to check and adjust settings.
|
|
|
|
|
|
|
|
|
#### 1.2.5.1 CLAMP (lock tool)
|
|
|
|
|
|
Button for fixing the tool clamp (for spindles with automatic changer)
|
|
|
|
|
|
#### 1.2.5.2 INT WATER
|
|
|
|
|
|
Turning on the water to cool the tool through the central hole. Water is supplied through the center of the spindle with air supply to clean the tube after the water is turned off. When turned on, the operator can adjust the air pressure for the required balance.
|
|
|
|
|
|
#### 1.2.5.3 FLUSH (lock tool)
|
|
|
|
|
|
Button for cleaning the tool clamp (for spindles with automatic changer)
|
|
|
|
|
|
#### 1.2.5.4 FLOOD
|
|
|
|
|
|
Turning on all instrument cooling systems: these are the internal and external cooling supplies. They help the operator to adjust the cooling direction of the tool to produce high-quality work and results.
|
|
|
|
|
|
#### 1.2.5.5 COVER
|
|
|
|
|
|
???
|
|
|
|
|
|
### 1.2.6 JOINT
|
|
|
|
|
|
|
|
|
|
|
|
The servomotor control tab allows you to exceed the limits in case of an error or if the operator needs to control each axis of the machine individually.
|
|
|
|
|
|
#### 1.2.6.1 JOINT NUMBER (x)
|
|
|
|
|
|
When clicked, a tab will open with a selection of the servo motor to control. In the case of the Y-axis, the movement must be carried out with extreme care, because the Y-axis controls two servomotors.
|
|
|
|
|
|
#### 1.2.6.2 HOME SELECTED
|
|
|
|
|
|
A button that will move the axes back to their home position based on the parameters set in the machine, using axis position limit sensors.
|
|
|
|
|
|
#### 1.2.6.3 -
|
|
|
|
|
|
A button to move the selected machine axis in the negative direction. Move with a small feed and be careful.
|
|
|
|
|
|
#### 1.2.6.4 +
|
|
|
|
|
|
A button to move the selected machine axis in a positive direction. Move with a small feed and be careful.
|
|
|
|
|
|
### 1.2.7 CONTROL
|
|
|
|
|
|
|
|
|
The operator's manual controls the machine. The operator can adjust the position of the selected cutting tool and perform necessary cutting operations. It is important to raise the work table for convenient loading of processed material and lower it with the material for further work. The operator has access to vacuum suction cups to move the material manually. There is an ability to return the C and B axes to their home positions after moving them manually.
|
|
|
|
|
|
|
|
|
#### 1.2.7.1 X+
|
|
|
|
|
|
Controls the movement of the machine along the coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.2 X-
|
|
|
|
|
|
Controls the movement of the machine along the coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.3 Y+
|
|
|
|
|
|
Controls the movement of the machine along the coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.4 Y-
|
|
|
|
|
|
Controls the movement of the machine along the coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.5 Z+
|
|
|
|
|
|
Controls the movement of the machine along the coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.6 Z-
|
|
|
|
|
|
Controls the movement of the machine along the coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.7 B+
|
|
|
|
|
|
Control of spindle tilt along coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.8 B-
|
|
|
|
|
|
Control of spindle tilt along coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.9 C+
|
|
|
|
|
|
Control of spindle rotation along coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.10 C-
|
|
|
|
|
|
Control of spindle rotation along coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.11 V+
|
|
|
|
|
|
Controlling the tilt of the water jet module along the coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.12 V-
|
|
|
|
|
|
Controlling the tilt of the water jet module along the coordinate axes in the selected direction.
|
|
|
|
|
|
#### 1.2.7.13 TABLE UP
|
|
|
|
|
|
A button to raise the desktop. The hydraulic pump is turned on and the distribution valve directs the oil into the cylinders to start the lifting mechanism of the worktable.
|
|
|
|
|
|
#### 1.2.7.14 TABLE STOP
|
|
|
|
|
|
A button to stop the operation of the lifting and lowering mechanism of the desktop. After pressing, the hydraulic pump turns off and the hydraulic distributor switches to the neutral position.
|
|
|
|
|
|
#### 1.2.7.15 TABLE DOWN
|
|
|
|
|
|
The button for lowering the desktop. The hydraulic pump is turned on and the distribution valve directs the oil into the cylinders to start the lowering mechanism of the working table.
|
|
|
|
|
|
#### 1.2.7.16 VACUUM UP
|
|
|
|
|
|
The operator uses a button to activate the vacuum suction cups to move the material. Once activated, the system lowers the vacuum suction cups into their working position using pneumatic cylinders.
|
|
|
To visualize the operation, a photo of the material on the desktop is displayed on the screen. This allows the user to see where the suction cups are relative to the material and the table. Depending on the vacuum generation system in use, the vacuum pump or air supply to the vacuum generators may be turned on.
|
|
|
Material movement operations should be carried out with a low rate of movement along the desired axes.
|
|
|
|
|
|
#### 1.2.7.17 VACUUM DOWN
|
|
|
|
|
|
The button is necessary for the operator to put the lifted object in the moved place on the desktop. After pressing, the machine will automatically lower the material onto the worktable, the vacuum generation system will turn off, this is turning off the vacuum pump or turning off the air supply to the vacuum generators. The machine will lower the material and raise the vacuum system to standby mode using pneumatic cylinders.
|
|
|
|
|
|
#### 1.2.7.18 ZERO B
|
|
|
|
|
|
Returning to the home (working) position of the spindle head along the B axis
|
|
|
|
|
|
#### 1.2.7.19 ZERO C
|
|
|
|
|
|
Returning to the home (working) position of the spindle head along the C axis
|
|
|
|
|
|
## 1.3 AUTO
|
|
|
|
|
|
|
|
|
|
|
|
### 1.3.1 G CODE
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.3.1.1 BLOCK
|
|
|
|
|
|
#### 1.3.1.2 HEADER
|
|
|
|
|
|
#### 1.3.1.3 CODE
|
|
|
|
|
|
Window displaying the G-code used by the machine
|
|
|
|
|
|
#### 1.3.1.4 INFO
|
|
|
|
|
|
Description of the operation currently in progress
|
|
|
|
|
|
#### 1.3.1.5 OPEN
|
|
|
|
|
|
Open the folder with programs to download to the machine
|
|
|
|
|
|
#### 1.3.1.6 RELOAD
|
|
|
|
|
|
Restarts a previously selected program.
|
|
|
|
|
|
#### 1.3.1.7 SET START
|
|
|
|
|
|
Setting the program to start from the selected location.
|
|
|
|
|
|
#### 1.3.1.8 CLEAN
|
|
|
|
|
|
Clearing the program menu and G-code display block
|
|
|
|
|
|
#### 1.3.1.9 START
|
|
|
|
|
|
Start downloaded program
|
|
|
|
|
|
#### 1.3.1.10 STOP
|
|
|
|
|
|
Stopping a running program
|
|
|
|
|
|
### 1.3.2 X CUT
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.3.2.1 X-CUT LENGTH
|
|
|
|
|
|
Cutting length along x axis
|
|
|
|
|
|
#### 1.3.2.2 X-CUT WIDTH
|
|
|
|
|
|
Width of required strip for cutting
|
|
|
|
|
|
#### 1.3.2.3 X-CUT COUNT
|
|
|
|
|
|
Number of required strips for x-axis cutting
|
|
|
|
|
|
#### 1.3.2.4 GENERATE
|
|
|
|
|
|
Generate G-code to perform cutting according to specified parameters
|
|
|
|
|
|
#### 1.3.2.5 EXIT
|
|
|
|
|
|
Output from built-in cutting G-code generator
|
|
|
|
|
|
### 1.3.3 X&Y CUT
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.3.3.1 X-CUT LENGTH
|
|
|
|
|
|
Cutting length along x axis
|
|
|
|
|
|
#### 1.3.3.2 X-CUT WIDTH
|
|
|
|
|
|
Width of required strip for x-axis cutting
|
|
|
|
|
|
#### 1.3.3.3 X-CUT COUNT
|
|
|
|
|
|
Number of required strips for x-axis cutting
|
|
|
|
|
|
#### 1.3.3.4 Y-CUT LENGTH
|
|
|
|
|
|
Cutting length along y axis
|
|
|
|
|
|
#### 1.3.3.5 Y-CUT WIDTH
|
|
|
|
|
|
Width of required strip for н-axis cutting
|
|
|
|
|
|
#### 1.3.3.6 Y-CUT COUNT
|
|
|
|
|
|
Number of required strips for y-axis cutting
|
|
|
|
|
|
#### 1.3.3.7 GENERATE
|
|
|
|
|
|
Create G-code to cut rectangles according to specified parameters.
|
|
|
|
|
|
#### 1.3.3.8 EXIT
|
|
|
|
|
|
Output from built-in cutting G-code generator
|
|
|
|
|
|
### 1.3.4 Y CUT
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.3.4.1 Y-CUT LENGTH
|
|
|
|
|
|
Cutting length along y axis
|
|
|
|
|
|
#### 1.3.4.2 Y-CUT WIDTH
|
|
|
|
|
|
Width of required strip for cutting
|
|
|
|
|
|
#### 1.3.4.3 Y-CUT COUNT
|
|
|
|
|
|
Number of required strips for y-axis cutting
|
|
|
|
|
|
#### 1.3.4.4 GENERATE
|
|
|
|
|
|
Create G-code to perform cutting according to specified parameters
|
|
|
|
|
|
#### 1.3.4.5 EXIT
|
|
|
|
|
|
Output from built-in cutting G-code generator
|
|
|
|
|
|
### 1.3.5 SLOPE
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.3.5.1 POINT 1 DEPTH
|
|
|
|
|
|
Setting the depth at the starting point for the slope
|
|
|
|
|
|
#### 1.3.5.2 POINT 2 DEPTH
|
|
|
|
|
|
Setting the depth at the end point for a slope
|
|
|
|
|
|
#### 1.3.5.3 LENGTH
|
|
|
|
|
|
Setting the cutting length for slope
|
|
|
|
|
|
#### 1.3.5.4 WIDTH
|
|
|
|
|
|
Setting the cutting width for slope
|
|
|
|
|
|
#### 1.3.5.5 GENERATE
|
|
|
|
|
|
Create G-code to perform cutting according to specified parameters
|
|
|
|
|
|
#### 1.3.5.6 EXIT
|
|
|
|
|
|
Output from built-in cutting G-code generator
|
|
|
|
|
|
### 1.3.6 MILLING
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.3.6.1 EACH STEP
|
|
|
|
|
|
Step depth per milling pass
|
|
|
|
|
|
#### 1.3.6.2 TOTAL DEPTH
|
|
|
|
|
|
Full depth for milling
|
|
|
|
|
|
#### 1.3.6.3 MILLING DIRECTION
|
|
|
|
|
|
Setting the milling direction. Horizontal x-axis (0), vertical y-axis (1) or two axes in turn (2)
|
|
|
|
|
|
#### 1.3.6.4 AREA TO COVER IN X AXIS
|
|
|
|
|
|
Milling length along x axis
|
|
|
|
|
|
#### 1.3.6.5 AREA TO COVER IN Y AXIS
|
|
|
|
|
|
Milling length along y axis
|
|
|
|
|
|
#### 1.3.6.6 WIDTH OF STEPS
|
|
|
|
|
|
Setting the cutting width for milling
|
|
|
|
|
|
#### 1.3.6.7 GENERATE
|
|
|
|
|
|
Create a G-code to perform milling according to the specified parameters.
|
|
|
|
|
|
#### 1.3.6.8 EXIT
|
|
|
|
|
|
Output from built-in cutting G-code generator
|
|
|
|
|
|
### 1.3.7 MILLING TABLE
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.3.7.1 EACH STEP
|
|
|
|
|
|
Step depth per milling pass
|
|
|
|
|
|
#### 1.3.7.2 TOTAL DEPTH
|
|
|
|
|
|
Full depth for milling
|
|
|
|
|
|
#### 1.3.7.3 MILLING DIRECTION
|
|
|
|
|
|
Setting the milling direction. Horizontal x-axis (0), vertical y-axis (1) or two axes in turn (2)
|
|
|
|
|
|
#### 1.3.7.4 AREA TO COVER IN X AXIS
|
|
|
|
|
|
Milling length along x axis
|
|
|
|
|
|
#### 1.3.7.5 AREA TO COVER IN Y AXIS
|
|
|
|
|
|
Milling length along y axis
|
|
|
|
|
|
#### 1.3.7.6 WIDTH OF STEPS
|
|
|
|
|
|
Setting the cutting width for milling
|
|
|
|
|
|
#### 1.3.7.7 START X
|
|
|
|
|
|
Coordinates of the position of the tool to start milling along the x axis
|
|
|
|
|
|
#### 1.3.7.8 START Y
|
|
|
|
|
|
Coordinates of the position of the tool to start milling along the y axis
|
|
|
|
|
|
#### 1.3.7.9 PROBE MILLING TOOL
|
|
|
|
|
|
Use of checking the length of the tool used to fine-tune the operation of the machine according to the program.
|
|
|
|
|
|
#### 1.3.7.10 CURRENT POSITION
|
|
|
|
|
|
Using the current machine position along the x and y axes to start the program
|
|
|
|
|
|
#### 1.3.7.11 GENERATE
|
|
|
|
|
|
Create a G-code to perform milling according to the specified parameters.
|
|
|
|
|
|
#### 1.3.7.12 EXIT
|
|
|
|
|
|
Output from built-in cutting G-code generator
|
|
|
|
|
|
## 1.4 MDI
|
|
|
|
|
|
|
|
|
|
|
|
### 1.4.1 LIST
|
|
|
|
|
|
Window to view the last command and previously used ones
|
|
|
|
|
|
### 1.4.2 INFO
|
|
|
|
|
|
Possibly used and examples of G codes
|
|
|
|
|
|
### 1.4.3 CLEAN
|
|
|
|
|
|
Cleaning info window
|
|
|
|
|
|
### 1.4.4 G CODE
|
|
|
|
|
|
Line for entering g command code
|
|
|
|
|
|
### 1.4.5 RUN
|
|
|
|
|
|
Run the entered G code command
|
|
|
|
|
|
## 1.5 I/O
|
|
|
|
|
|
|
|
|
|
|
|
### 1.5.1 INPUT (1-32)
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.5.1.1 01 [ECAT.11.01] X LIMIT/HOME SENSOR
|
|
|
|
|
|
Input signal from the sensor along the x axis.
|
|
|
|
|
|
#### 1.5.1.2 02 [ECAT.11.02] Y1 LIMIT/HOME SENSOR
|
|
|
|
|
|
Input signal from the sensor along the y1 axis.
|
|
|
|
|
|
#### 1.5.1.3 03 [ECAT.11.03] Y2 LIMIT/HOME SENSOR
|
|
|
|
|
|
Input signal from the sensor along the y2 axis.
|
|
|
|
|
|
#### 1.5.1.4 04 [ECAT.11.04] Z LIMIT/HOME SENSOR
|
|
|
|
|
|
Input signal from the sensor along the z axis.
|
|
|
|
|
|
#### 1.5.1.5 05 [ECAT.11.05] C HOME SENSOR
|
|
|
|
|
|
Input signal from the sensor along the c axis.
|
|
|
|
|
|
#### 1.5.1.6 06 [ECAT.11.06] B HOME SENSOR
|
|
|
|
|
|
Input signal from the sensor along the b axis.
|
|
|
|
|
|
#### 1.5.1.7 07 [ECAT.11.07] V HOME SENSOR
|
|
|
|
|
|
Input signal from the sensor along the v axis.
|
|
|
|
|
|
#### 1.5.1.8 08 [ECAT.11.08] SCANNER UP
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the top.
|
|
|
|
|
|
#### 1.5.1.9 09 [ECAT.11.09] STONE PROBE SAFETY
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the top.
|
|
|
|
|
|
#### 1.5.1.10 10 [ECAT.11.10] STONE PROBE
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the bottom.
|
|
|
|
|
|
#### 1.5.1.11 11 [ECAT.11.11] VACUUM GROUP 1 IS DOWN
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the bottom.
|
|
|
|
|
|
#### 1.5.1.12 12 [ECAT.11.12] VACUUM GROUP 2 IS DOWN
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the bottom.
|
|
|
|
|
|
#### 1.5.1.13 13 [ECAT.11.13] VACUUM GROUP 1 TILTED
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the bottom.
|
|
|
|
|
|
#### 1.5.1.14 14 [ECAT.11.14] VACUUM GROUP 2 TILTED
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the bottom.
|
|
|
|
|
|
#### 1.5.1.15 15 [ECAT.11.15] BLADE PROBE
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the bottom 1.
|
|
|
|
|
|
#### 1.5.1.16 16 [ECAT.11.16] BLADE PROBE SAFETY
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the bottom2 .
|
|
|
|
|
|
#### 1.5.1.17 17 [ECAT.12.01] VACUUM 1 IN PRESSURE
|
|
|
|
|
|
Input signal from the sensor on the vacuum generator, switching on and off.
|
|
|
|
|
|
#### 1.5.1.18 18 [ECAT.12.02] VACUUM 2 IN PRESSURE
|
|
|
|
|
|
Input signal from the sensor on the vacuum generator, switching on and off.
|
|
|
|
|
|
#### 1.5.1.19 19 [ECAT.12.03] VACUUM 3 IN PRESSURE
|
|
|
|
|
|
Input signal from the sensor on the vacuum generator, switching on and off.
|
|
|
|
|
|
#### 1.5.1.20 20 [ECAT.12.04] VACUUM 4 IN PRESSURE
|
|
|
|
|
|
Input signal from the sensor on the vacuum generator, switching on and off.
|
|
|
|
|
|
#### 1.5.1.21 21 [ECAT.12.05] VACUUM 5 IN PRESSURE
|
|
|
|
|
|
Input signal from the sensor on the vacuum generator, switching on and off.
|
|
|
|
|
|
#### 1.5.1.22 22 [ECAT.12.06] VACUUM 6 IN PRESSURE
|
|
|
|
|
|
Input signal from the sensor on the vacuum generator, switching on and off.
|
|
|
|
|
|
#### 1.5.1.23 23 [ECAT.12.07] VACUUM 7 IN PRESSURE
|
|
|
|
|
|
Input signal from the sensor on the vacuum generator, switching on and off.
|
|
|
|
|
|
#### 1.5.1.24 24 [ECAT.12.08] VACUUM 8 IN PRESSURE
|
|
|
|
|
|
Input signal from the sensor on the vacuum generator, switching on and off.
|
|
|
|
|
|
#### 1.5.1.25 25 [ECAT.12.09] WATERJET UP
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the top.
|
|
|
|
|
|
#### 1.5.1.26 26 [ECAT.12.10] WATERJET DOWN
|
|
|
|
|
|
Input signal from the sensor on the air cylinder to determine the position at the bottom.
|
|
|
|
|
|
#### 1.5.1.27 27 [ECAT.12.11] TABLE OPEN
|
|
|
|
|
|
Input signal from the sensor on the hydraulic cylinder to determine the position of the open table.
|
|
|
|
|
|
#### 1.5.1.28 28 [ECAT.12.12] TABLE CLOSE
|
|
|
|
|
|
Input signal from the sensor on the hydraulic cylinder to determine the down position.
|
|
|
|
|
|
#### 1.5.1.29 29 [ECAT.12.13] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.30 30 [ECAT.12.14] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.31 31 [ECAT.12.15] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.32 32 [ECAT.12.16] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
### 1.5.1 INPUT (33-64)
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.5.1.33 33 [ECAT.17.01] BUTTON AUTOMATIC
|
|
|
|
|
|
#### 1.5.1.34 34 [ECAT.17.02] BUTTON PAUSE
|
|
|
|
|
|
#### 1.5.1.35 35 [ECAT.17.03] BUTTON STOP
|
|
|
|
|
|
#### 1.5.1.36 36 [ECAT.17.04] SWITCH TCP
|
|
|
|
|
|
#### 1.5.1.37 37 [ECAT.17.05] SWITCH 45 DEG
|
|
|
|
|
|
#### 1.5.1.38 38 [ECAT.17.06] SWITCH 90 DEG
|
|
|
|
|
|
#### 1.5.1.39 39 [ECAT.17.07] JOYSTICK X+
|
|
|
|
|
|
#### 1.5.1.40 40 [ECAT.17.08] JOYSTICK X-
|
|
|
|
|
|
#### 1.5.1.41 41 [ECAT.17.09] JOYSTICK Y+
|
|
|
|
|
|
#### 1.5.1.42 42 [ECAT.17.10] JOYSTICK Y-
|
|
|
|
|
|
#### 1.5.1.43 43 [ECAT.17.11] JOYSTICK Z+
|
|
|
|
|
|
#### 1.5.1.44 44 [ECAT.17.12] JOYSTICK Z-
|
|
|
|
|
|
#### 1.5.1.45 45 [ECAT.17.13] JOYSTICK C+
|
|
|
|
|
|
#### 1.5.1.46 46 [ECAT.17.14] JOYSTICK C-
|
|
|
|
|
|
#### 1.5.1.47 47 [ECAT.17.15] JOYSTICK B+
|
|
|
|
|
|
#### 1.5.1.48 48 [ECAT.17.16] JOYSTICK B-
|
|
|
|
|
|
#### 1.5.1.49 49 [ECAT.18.01] SPEED ENCODER A
|
|
|
|
|
|
#### 1.5.1.50 50 [ECAT.18.02] SPEED ENCODER B
|
|
|
|
|
|
#### 1.5.1.51 51 [ECAT.18.03] EMERGENCY
|
|
|
|
|
|
#### 1.5.1.52 52 [ECAT.18.04] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.53 53 [ECAT.18.05] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.54 54 [ECAT.18.06] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.55 55 [ECAT.18.07] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.56 56 [ECAT.18.08] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.57 57 [ECAT.18.09] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.58 58 [ECAT.18.10] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.59 59 [ECAT.18.11] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.60 60 [ECAT.18.12] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.61 61 [ECAT.18.13] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.62 62 [ECAT.18.14] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.63 63 [ECAT.18.15] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.64 64 [ECAT.18.16] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
### 1.5.1 INPUT (65-96)
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.5.1.65 65 [ECAT.10.1] POWER OFF ALARM
|
|
|
|
|
|
#### 1.5.1.66 66 [ECAT.10.2] VACUUM PUMP THERMIC ALARM
|
|
|
|
|
|
#### 1.5.1.67 67 [ECAT.10.3] HYDRAULIC PUNP THERMIC ALARM
|
|
|
|
|
|
#### 1.5.1.68 68 [ECAT.10.4] AIR ALARM
|
|
|
|
|
|
#### 1.5.1.69 69 [ECAT.10.5] WATER ALARM
|
|
|
|
|
|
#### 1.5.1.70 70 [ECAT.10.6] GARNET LEVEL ALARM
|
|
|
|
|
|
#### 1.5.1.71 71 [ECAT.10.7] GARNET PRESSURE ALARM
|
|
|
|
|
|
#### 1.5.1.72 72 [ECAT.10.8] SAFETY BAR
|
|
|
|
|
|
#### 1.5.1.73 73 [ECAT.10.9] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.74 74 [ECAT.10.10] SPINDLE HOT ALARM
|
|
|
|
|
|
#### 1.5.1.75 75 [ECAT.10.11] SPINDLE MOTOR CHILLER ALARM
|
|
|
|
|
|
#### 1.5.1.76 76 [ECAT.10.12] WATERJET HOT ALARM
|
|
|
|
|
|
#### 1.5.1.77 77 [ECAT.10.13] WATERJET CHILLER ALARM
|
|
|
|
|
|
#### 1.5.1.78 78 [ECAT.10.14] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.79 79 [ECAT.10.15] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.80 80 [ECAT.10.16] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.81 81 [ECAT.16.1] TILTER VACUUM 1 IN PRESSURE
|
|
|
|
|
|
#### 1.5.1.82 82 [ECAT.16.2] TILTER VACUUM 2 IN PRESSURE
|
|
|
|
|
|
#### 1.5.1.83 83 [ECAT.16.3] TILTER VACUUM 3 IN PRESSURE
|
|
|
|
|
|
#### 1.5.1.84 84 [ECAT.16.4] TILTER VACUUM 4 IN PRESSURE
|
|
|
|
|
|
#### 1.5.1.85 85 [ECAT.16.5] TILTER VACUUM 5 IN PRESSURE
|
|
|
|
|
|
#### 1.5.1.86 86 [ECAT.16.6] TILTER VACUUM 6 IN PRESSURE
|
|
|
|
|
|
#### 1.5.1.87 87 [ECAT.16.7] TILTER VACUUM 7 IN PRESSURE
|
|
|
|
|
|
#### 1.5.1.88 88 [ECAT.16.8] TILTER VACUUM 8 IN PRESSURE
|
|
|
|
|
|
#### 1.5.1.89 89 [ECAT.16.9] TILTER AT 0A°
|
|
|
|
|
|
#### 1.5.1.90 90 [ECAT.16.10] TILTER AT 180A°
|
|
|
|
|
|
#### 1.5.1.91 91 [ECAT.16.11] FLIPPER SAFETY
|
|
|
|
|
|
#### 1.5.1.92 92 [ECAT.16.12] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.93 93 [ECAT.16.13] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.94 94 [ECAT.16.14] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.95 95 [ECAT.16.15] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
#### 1.5.1.96 96 [ECAT.16.16] NONE
|
|
|
|
|
|
The input signal on the control card is not assigned
|
|
|
|
|
|
## 1.5.1 INPUT (97-108)
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.5.1.97 REMOTE SPD+
|
|
|
|
|
|
#### 1.5.1.98 REMOTE BLADE ON
|
|
|
|
|
|
#### 1.5.1.99 REMOTE SPD-
|
|
|
|
|
|
#### 1.5.1.100 REMOTE CONFIRM
|
|
|
|
|
|
#### 1.5.1.101 REMOTE Y+
|
|
|
|
|
|
#### 1.5.1.102 REMOTE Y-
|
|
|
|
|
|
#### 1.5.1.103 REMOTE C+
|
|
|
|
|
|
#### 1.5.1.104 REMOTE C-
|
|
|
|
|
|
#### 1.5.1.105 REMOTE X-
|
|
|
|
|
|
#### 1.5.1.106 REMOTE Z-
|
|
|
|
|
|
#### 1.5.1.107 REMOTE Z+
|
|
|
|
|
|
#### 1.5.1.108 REMOTE X+
|
|
|
|
|
|
### 1.5.2 OUTPUT (1-32)
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.5.2.1 01 [ECAT.13.01] ENABLE MACHINE
|
|
|
|
|
|
#### 1.5.2.2 02 [ECAT.13.02] RESET CAMERA
|
|
|
|
|
|
#### 1.5.2.3 03 [ECAT.13.03] WATERJET ENABLE
|
|
|
|
|
|
#### 1.5.2.4 04 [ECAT.13.04] VACUUM PUMP
|
|
|
|
|
|
#### 1.5.2.5 05 [ECAT.13.05] HYDRAULIC PUMP
|
|
|
|
|
|
#### 1.5.2.6 06 [ECAT.13.06] GREASE PUMP
|
|
|
|
|
|
#### 1.5.2.7 07 [ECAT.13.07] CHILLER SWITCH
|
|
|
|
|
|
#### 1.5.2.8 08 [ECAT.13.08] TABLE SLOW SWITCH VALVE
|
|
|
|
|
|
#### 1.5.2.9 09 [ECAT.13.09] SLAB WASH
|
|
|
|
|
|
#### 1.5.2.10 10 [ECAT.13.10] WATERJET GUN
|
|
|
|
|
|
#### 1.5.2.11 11 [ECAT.13.11] INTERNAL WATER
|
|
|
|
|
|
#### 1.5.2.12 12 [ECAT.13.12] EXTERNAL WATER
|
|
|
|
|
|
#### 1.5.2.13 13 [ECAT.13.13] TABLE UP
|
|
|
|
|
|
#### 1.5.2.14 14 [ECAT.13.14] TABLE DOWN
|
|
|
|
|
|
#### 1.5.2.15 15 [ECAT.15.15] SCANER DOWN
|
|
|
|
|
|
#### 1.5.2.16 16 [ECAT.13.16] BLADE LASER
|
|
|
|
|
|
#### 1.5.2.17 17 [ECAT.14.01] VACUUM 1
|
|
|
|
|
|
#### 1.5.2.18 18 [ECAT.14.02] VACUUM 2
|
|
|
|
|
|
#### 1.5.2.19 19 [ECAT.14.03] VACUUM 3
|
|
|
|
|
|
#### 1.5.2.20 20 [ECAT.14.04] VACUUM 4
|
|
|
|
|
|
#### 1.5.2.21 21 [ECAT.14.05] VACUUM 5
|
|
|
|
|
|
#### 1.5.2.22 22 [ECAT.14.06] VACUUM 6
|
|
|
|
|
|
#### 1.5.2.23 23 [ECAT.14.07] VACUUM 7
|
|
|
|
|
|
#### 1.5.2.24 24 [ECAT.14.08] VACUUM 8
|
|
|
|
|
|
#### 1.5.2.25 25 [ECAT.14.09] VACUUM GROUP 1 DOWN
|
|
|
|
|
|
#### 1.5.2.26 26 [ECAT.14.10] VACUUM GROUP 2 DOWN
|
|
|
|
|
|
#### 1.5.2.27 27 [ECAT.14.11] VACUUM GROUP 1 TILT
|
|
|
|
|
|
#### 1.5.2.28 28 [ECAT.14.12] VACUUM GROUP 2 TILT
|
|
|
|
|
|
#### 1.5.2.29 29 [ECAT.14.13] SLAB PROBE CYLINDER
|
|
|
|
|
|
#### 1.5.2.30 30 [ECAT.14.14] PNEUMATIC SPINDLE SEAL
|
|
|
|
|
|
#### 1.5.2.31 31 [ECAT.14.15] WATERJET GARNET
|
|
|
|
|
|
#### 1.5.2.32 32 [ECAT.14.16] WATERJET DOWN
|
|
|
|
|
|
### 1.5.2 OUTPUT (33-48)
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.5.2.33 33 [ECAT.19.01] RED LIGHT
|
|
|
|
|
|
#### 1.5.2.34 34 [ECAT.19.02] YELLOW LIGHT
|
|
|
|
|
|
#### 1.5.2.35 35 [ECAT.19.03] GREEN LIGHT
|
|
|
|
|
|
#### 1.5.2.36 36 [ECAT.19.04] WHITE LIGHT
|
|
|
|
|
|
#### 1.5.2.37 37 [ECAT.19.05] TCP LIGHT
|
|
|
|
|
|
#### 1.5.2.38 38 [ECAT.19.06] NONE
|
|
|
|
|
|
#### 1.5.2.39 39 [ECAT.19.07] NONE
|
|
|
|
|
|
#### 1.5.2.40 40 [ECAT.19.08] NONE
|
|
|
|
|
|
#### 1.5.2.41 41 [ECAT.19.09] NONE
|
|
|
|
|
|
#### 1.5.2.42 42 [ECAT.19.10] NONE
|
|
|
|
|
|
#### 1.5.2.43 43 [ECAT.19.11] NONE
|
|
|
|
|
|
#### 1.5.2.44 44 [ECAT.19.12] NONE
|
|
|
|
|
|
#### 1.5.2.45 45 [ECAT.19.13] NONE
|
|
|
|
|
|
#### 1.5.2.46 46 [ECAT.19.14] NONE
|
|
|
|
|
|
#### 1.5.2.47 47 [ECAT.19.15] NONE
|
|
|
|
|
|
#### 1.5.2.48 48 [ECAT.19.16] NONE
|
|
|
|
|
|
### 1.5.3 DOUT (1-16)
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.5.3.1 1 [ECAT.15.01] FLIPPER VAC 1
|
|
|
|
|
|
#### 1.5.3.2 42 [ECAT.15.02] FLIPPER VAC 2
|
|
|
|
|
|
#### 1.5.3.3 43 [ECAT.15.03] FLIPPER VAC 3
|
|
|
|
|
|
#### 1.5.3.4 44 [ECAT.15.04] FLIPPER VAC 4
|
|
|
|
|
|
#### 1.5.3.5 45 [ECAT.15.05] FLIPPER VAC 5
|
|
|
|
|
|
#### 1.5.3.6 46 [ECAT.15.06] FLIPPER VAC 6
|
|
|
|
|
|
#### 1.5.3.7 47 [ECAT.15.07] FLIPPER VAC 7
|
|
|
|
|
|
#### 1.5.3.8 48 [ECAT.15.08] FLIPPER VAC 8
|
|
|
|
|
|
#### 1.5.3.9 49 [ECAT.15.09] FLIPPER FLIP
|
|
|
|
|
|
#### 1.5.3.10 59 [ECAT.15.10] NONE
|
|
|
|
|
|
#### 1.5.3.11 60 [ECAT.15.11] NONE
|
|
|
|
|
|
#### 1.5.3.12 61 [ECAT.15.12] NONE
|
|
|
|
|
|
#### 1.5.3.13 62 [ECAT.15.13] NONE
|
|
|
|
|
|
#### 1.5.3.14 63 [ECAT.15.14] NONE
|
|
|
|
|
|
#### 1.5.3.15 64 [ECAT.15.15] NONE
|
|
|
|
|
|
#### 1.5.3.16 65 [ECAT.15.16] NONE
|
|
|
|
|
|
### 1.5.4 SERVICE
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.5.4.1 MACHINE HOURS
|
|
|
|
|
|
#### 1.5.4.2 SPINDLE HOURS
|
|
|
|
|
|
#### 1.5.4.3 WATERJET HOURS
|
|
|
|
|
|
## 1.6 PARAMETER
|
|
|
|
|
|
|
|
|
|
|
|
### 1.6.1 GENERAL (1-18)
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.6.1.1 Language
|
|
|
|
|
|
#### 1.6.1.2 Machine
|
|
|
|
|
|
#### 1.6.1.3 Write debug info to the debug.txt
|
|
|
|
|
|
#### 1.6.1.4 Lock page
|
|
|
|
|
|
#### 1.6.1.5 Use aitalmac remote
|
|
|
|
|
|
#### 1.6.1.6 Auto accept pnc program
|
|
|
|
|
|
#### 1.6.1.7 Auto clean pnc program
|
|
|
|
|
|
#### 1.6.1.8 Check B angle when Z down without Blade
|
|
|
|
|
|
#### 1.6.1.9 Image position is without KINS
|
|
|
|
|
|
#### 1.6.1.10 Debug mode
|
|
|
|
|
|
#### 1.6.1.11 GCode type for gcode page
|
|
|
|
|
|
#### 1.6.1.12 Accent Color
|
|
|
|
|
|
#### 1.6.1.13 Primary Color
|
|
|
|
|
|
#### 1.6.1.14 CNC communication rate (ms)
|
|
|
|
|
|
#### 1.6.1.15 Wait time of after machine on (s)
|
|
|
|
|
|
#### 1.6.1.16 Wait time of after finish homing (ms)
|
|
|
|
|
|
#### 1.6.1.17 Linear speed
|
|
|
|
|
|
#### 1.6.1.18 Angular speed
|
|
|
|
|
|
### 1.6.1 GENERAL (19-34)
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.6.1.19 No tool linear speed (for A8)
|
|
|
|
|
|
#### 1.6.1.20 No tool angular speed (for A8)
|
|
|
|
|
|
#### 1.6.1.21 Pick point radius
|
|
|
|
|
|
#### 1.6.1.22 Laser x offset
|
|
|
|
|
|
#### 1.6.1.23 Laser y offset
|
|
|
|
|
|
#### 1.6.1.24 Table corner X point (G56)
|
|
|
|
|
|
#### 1.6.1.25 Table corner Y point (G56)
|
|
|
|
|
|
#### 1.6.1.26 X Parking Position
|
|
|
|
|
|
#### 1.6.1.27 Y Parking Position
|
|
|
|
|
|
#### 1.6.1.28 Z Safe Position
|
|
|
|
|
|
#### 1.6.1.29 B Safe Position
|
|
|
|
|
|
#### 1.6.1.30 C safe Position
|
|
|
|
|
|
#### 1.6.1.31 V safe Position
|
|
|
|
|
|
#### 1.6.1.32 Z fingerbit probe start
|
|
|
|
|
|
#### 1.6.1.33 Z fingerbit probe end
|
|
|
|
|
|
#### 1.6.1.34 Fingerbit probe B safe
|
|
|
|
|
|
### 1.6.1 GENERAL (35-50)
|
|
|
|
|
|
|
|
|
|
|
|
#### 1.6.1.35 Blade probe C safe
|
|
|
|
|
|
#### 1.6.1.36 Z blade probe start
|
|
|
|
|
|
#### 1.6.1.37 Z blade probe end
|
|
|
|
|
|
#### 1.6.1.38 Blade probe x position
|
|
|
|
|
|
#### 1.6.1.39 Blade probe y position
|
|
|
|
|
|
#### 1.6.1.40 Blade probe z position
|
|
|
|
|
|
#### 1.6.1.41 Blade probe down feed
|
|
|
|
|
|
#### 1.6.1.42 Table x point
|
|
|
|
|
|
#### 1.6.1.43 Table y point
|
|
|
|
|
|
#### 1.6.1.44 Table width
|
|
|
|
|
|
#### 1.6.1.45 Table height
|
|
|
|
|
|
#### 1.6.1.46 Resolution
|
|
|
|
|
|
#### 1.6.1.47 Use internet camera
|
|
|
|
|
|
#### 1.6.1.48 Picture count (work for single host)
|
|
|
|
|
|
#### 1.6.1.49 Old camera
|
|
|
|
|
|
#### 1.6.1.50 Take X0 image position |