@ -89,7 +89,7 @@ The **Manual Page** provides direct access to machine operations and motion cont
- Activates auxiliary water systems.
- Controls cooling system water flow.
- [**Joint Override**](#h-126-joint-override)
- [**Joint Override**](#h-126-joint)
- Allows bypassing of axis limit sensors to move beyond axis limits.
- **Note**: This function should only be used with caution by authorized personnel.
@ -528,7 +528,7 @@ Lifts the waterjet cutting head when clicked. Once lifted, the machine switches
#### 1.2.3.2 Start Cut
Initiates the waterjet pump. When pressed, the pump begins building up pressure to the value set in the [**parameters page**](#h-1-6-1-116-pressure-of-wateret-manual-cutting). Simultaneously, the garnet valve opens to allow garnet flow into the cutting head. After a predefined delay, also set in the [**parameters page**](#h-1-6-1-114-pressure-pause-start), the waterjet is fully operational and ready to cut.
Initiates the waterjet pump. When pressed, the pump begins building up pressure to the value set in the [**parameters page**](#h-161116-pressure-of-wateret-manual-cutting). Simultaneously, the garnet valve opens to allow garnet flow into the cutting head. After a predefined delay, also set in the [**parameters page**](#h-161114-pressure-pause-start), the waterjet is fully operational and ready to cut.
#### 1.2.3.3 Down
@ -550,11 +550,11 @@ Clears all previously stored points from memory and removes them from the 3D pre
#### 1.2.4.2 Pick Point
Records a new point in memory and marks it as a red cross in the 3D preview. The point corresponds to the laser pointer's position, with its offsets relative to the tool configured in the [**parameters page**](#h-1-6-1-22-laser-x-offset). For 5-axis saws, orient the C axis at C -90 (parking) with the blade pointing forward to ensure accurate retrieval and alignment.
Records a new point in memory and marks it as a red cross in the 3D preview. The point corresponds to the laser pointer's position, with its offsets relative to the tool configured in the [**parameters page**](#h-16122-laser-x-offset). For 5-axis saws, orient the C axis at C -90 (parking) with the blade pointing forward to ensure accurate retrieval and alignment.
#### 1.2.4.3 Save Points
Opens the Windows save dialog to save all stored points as a DXF file. Each point is represented as a circle in the DXF file, with its radius specified in the [**parameters page**](#h-1-6-1-21-pick-point-radius). This file is suitable for further processing or program creation.
Opens the Windows save dialog to save all stored points as a DXF file. Each point is represented as a circle in the DXF file, with its radius specified in the [**parameters page**](#h-16121-pick-point-radius). This file is suitable for further processing or program creation.
The stored points have versatile applications, including:
- **Material Position Reference**: Use the points to locate the material's position within the machine or any reachable point in the working area.
@ -563,11 +563,15 @@ The stored points have versatile applications, including:
**Note**: The stored points adhere to the machine's coordinate system. If the laser pointer marks a point, the machine **tool** will process at that position—**not** the laser pointer.
#### 1.2.4.4 PROBE BLADE
#### 1.2.4.4 Probe Blade
The button for checking the diameter of the installed blade. After checking, the actual size of the blade will be recorded in the tool settings and the machine will execute commands with necessary corrections. This includes the depth of immersion into the worktable and the exit of the cut from the material, which helps to avoid collisions and incorrect cuts.
This button initiates the diameter check for the main blade tool mounted on the spindle. The machine moves to the designated [**probe position**](#h-16138-blade-probe-x-position) and carefully lowers toward the probe until the blade makes contact, allowing it to measure the blade's diameter. The measured value is then recorded in the [**tool's settings**](#h-121715-cnc-diameter).
#### 1.2.4.5 PROBE FINGERBIT
All subsequent manual and semi-automatic functions that utilize the blade automatically adjust for this measurement. Corrections include the safe rapid movement height, the height required to reach the material, and the height to approach the workbench surface. Since these height adjustments are calculated based on the blade's radius, any changes to the diameter will result in only half as much change in the corresponding height values. These adjustments ensure safe and precise machine operations.
**Note:** It is advised to initiate the probe blade sequence from the parking position, or at least from a position where it is safe to lift the blade straight up, to avoid collisions or unsafe movements.
#### 1.2.4.5 Probe Fingerbit
The button for checking the length of the installed milling cutter is located on the machine. After checking, the actual length of the cutter will be recorded in the tool parameters, and the machine will execute commands with the necessary adjustments. This ensures that the depth of immersion into the worktable and the beginning of milling are accurate, based on the thickness of the material being processed. This helps to avoid collisions and incorrect cuts, as well as any collisions with the material being machined.
@ -2469,9 +2473,9 @@ The safety clearance distance of vacuum cups above the stone material.
## 1.9 Machine
## 1.10 Right panel
## 1.10 Status and Control Panel
### 1.10.1 3d Preview
@ -2505,9 +2509,9 @@ The safety clearance distance of vacuum cups above the stone material.
