***Figure 1**: The AitalMAC application User Interface as it's displayed before connecting*
@ -31,7 +31,7 @@ The software interface is divided into distinct sections, each serving a specifi
- **Other Info**: Including machine status, active program, and system warnings.
## 1.1 Connect window
## 1.1 Connect Window
***Figure 1.1**: The Connect window which only appears when automatic connection fails*
@ -152,7 +152,7 @@ The designation of a tool as main or secondary depends entirely on how the tool
This button moves the machine to a designated [**parking position**](#h-16126-x-parking-position) as defined in the [**parameters**](#h-16-parameters). Parking is not always safe, particularly when the machine is engaged with the material, such as during a 45-degree miter cut. Always ensure the machine is in a safe state before initiating the parking operation.
#### 1.2.1.5 Touch-Off
#### 1.2.1.5 Touch-off
Moves the machine origin reference point to the current tool position, effectively redefining the machine’s working coordinates.
@ -499,7 +499,7 @@ The Spindle tab provides direct controls for testing the spindle independently o
Halts the spindle immediately, regardless of how it was started.
#### 1.2.2.2 CW (Clockwise)
#### 1.2.2.2 CW (clockwise)
Enables the spindle to rotate clockwise, which is the standard rotation direction for AitalMAC machines.
@ -507,11 +507,11 @@ Enables the spindle to rotate clockwise, which is the standard rotation directio
- **Compatibility**: AitalMAC uses right-threaded spindles (unlike the traditional left-threaded spindles in the stone industry) to maintain consistency with CNC work centers. This allows for interchangeable tools and versatile machine functionality.
- **Operation**: This button must be pressed to initiate rotation. Speed adjustments (+/- buttons) will not function unless a direction is specified.
#### 1.2.2.3 - (Spindle Speed Decrease)
#### 1.2.2.3 - (spindle Speed Decrease)
Reduces spindle speed by 100 RPM per click. Requires a rotation direction to be specified first.
#### 1.2.2.4 + (Spindle Speed Increase)
#### 1.2.2.4 + (spindle Speed Increase)
Increases spindle speed by 100 RPM per click. Requires the spindle to be initiated in a specified direction (set with the CW button).
@ -603,7 +603,7 @@ The laser line corresponds to the direction of the cutting blade and helps the o
A tab with output signals for various machine functions. The operator can use these signals to check and adjust settings.
#### 1.2.5.1 CLAMP (lock tool)
#### 1.2.5.1 CLAMP (Lock Tool)
Button for fixing the tool clamp (for spindles with automatic changer)
@ -611,7 +611,7 @@ Button for fixing the tool clamp (for spindles with automatic changer)
Turning on the water to cool the tool through the central hole. Water is supplied through the center of the spindle with air supply to clean the tube after the water is turned off. When turned on, the operator can adjust the air pressure for the required balance.
#### 1.2.5.3 FLUSH (lock tool)
#### 1.2.5.3 FLUSH
Button for cleaning the tool clamp (for spindles with automatic changer)
@ -1410,51 +1410,51 @@ The input signal on the control card is not assigned
#### 1.5.1.97 REMOTE SPD+
#### 1.5.1.97 REMOTE SPD+
The input signal is a change in the speed of the spindle as a percentage of its initial speed.
#### 1.5.1.98 REMOTE BLADE ON
#### 1.5.1.98 REMOTE BLADE ON
Input signal for turning on the spindle from the remote control
#### 1.5.1.99 REMOTE SPD-
#### 1.5.1.99 REMOTE SPD-
The input signal is used to reduce the speed of the spindle as a percentage of its initial speed.
#### 1.5.1.100 REMOTE CONFIRM
#### 1.5.1.100 REMOTE CONFIRM
The input signal for connecting the remote control
#### 1.5.1.101 REMOTE Y+
#### 1.5.1.101 REMOTE Y+
An input signal to enable the movement of the machine in a positive direction along the Y-axis using the remote control.
#### 1.5.1.102 REMOTE Y-
#### 1.5.1.102 REMOTE Y-
An input signal to turn on the movement of the machine in the negative direction along the Y-axis using the remote control.
#### 1.5.1.103 REMOTE C+
#### 1.5.1.103 REMOTE C+
An input signal to enable the movement of the machine in a positive direction along the C-axis using the remote control.
#### 1.5.1.104 REMOTE C-
#### 1.5.1.104 REMOTE C-
An input signal to turn on the movement of the machine in the negative direction along the C-axis using the remote control.
#### 1.5.1.105 REMOTE X-
#### 1.5.1.105 REMOTE X-
An input signal to turn on the movement of the machine in the negative direction along the X-axis using the remote control.
#### 1.5.1.106 REMOTE Z-
#### 1.5.1.106 REMOTE Z-
An input signal to turn on the movement of the machine in the negative direction along the Z-axis using the remote control.
#### 1.5.1.107 REMOTE Z+
#### 1.5.1.107 REMOTE Z+
An input signal to enable the movement of the machine in a positive direction along the Z-axis using the remote control.
#### 1.5.1.108 REMOTE X+
#### 1.5.1.108 REMOTE X+
An input signal to enable the movement of the machine in a positive direction along the X-axis using the remote control.
@ -1765,31 +1765,31 @@ Allows the selection of the interface language. Users can activate one of the av
Enables the selection of the machine model for parameter configuration. Activate the appropriate model to adjust settings.
#### 1.6.1.3 Write debug info to the debug.txt
#### 1.6.1.3 Write Debug Info To The Debug.txt
Enabling or disabling the "Write debug information to a file" debug.txt
#### 1.6.1.4 Lock page
#### 1.6.1.4 Lock Page
Enabling or disabling the ability to block a page
#### 1.6.1.5 Use AitalMAC Remote
#### 1.6.1.5 Use Aitalmac Remote
Enables or disables the ability to use the AitalMAC remote control for machine operations.
#### 1.6.1.6 Auto accept pnc program
#### 1.6.1.6 Auto Accept Pnc Program
#### 1.6.1.7 Auto clean pnc program
#### 1.6.1.7 Auto Clean Pnc Program
#### 1.6.1.8 Check B angle when Z down without Blade
#### 1.6.1.8 Check B Angle When Z Down Without Blade
Enabling or disabling the ability check B angle when Z down without Blade
#### 1.6.1.9 Image position is without KINS
#### 1.6.1.9 Image Position Is Without KINS
#### 1.6.1.10 Debug mode
#### 1.6.1.10 Debug Mode
#### 1.6.1.11 GCode type for gcode page
#### 1.6.1.11 Gcode Type For Gcode Page
Choosing the file format for downloading the G-code program
@ -1893,47 +1893,47 @@ The B-axis angle position for performing the tool length measurement command usi
#### 1.6.1.35 Blade probe C safe
#### 1.6.1.35 Blade Probe C Safe
The C-axis angle for performing the blade diameter measurement using the probe.
#### 1.6.1.36 Z blade probe start
#### 1.6.1.36 Z Blade Probe Start
The Z-axis coordinate for starting the slow descent of the machine head to the probe for measuring the blade diameter.
#### 1.6.1.37 Z blade probe end
#### 1.6.1.37 Z Blade Probe End
The Z-axis coordinate for ending the descent of the machine head to the probe for measuring the blade diameter.
#### 1.6.1.38 Blade probe x position
#### 1.6.1.38 Blade Probe X Position
The X-axis coordinate of the probe.
#### 1.6.1.39 Blade probe y position
#### 1.6.1.39 Blade Probe Y Position
The Y-axis coordinate of the probe.
#### 1.6.1.40 Blade probe z position
#### 1.6.1.40 Blade Probe Z Position
The Z-axis coordinate of the probe.
#### 1.6.1.41 Blade probe down feed
#### 1.6.1.41 Blade Probe Down Feed
The feed rate for performing the blade diameter measurement.
#### 1.6.1.42 Table x point
#### 1.6.1.42 Table X Point
The X-axis coordinate of the table corner point.
#### 1.6.1.43 Table y point
#### 1.6.1.43 Table Y Point
The Y-axis coordinate of the table corner point.
#### 1.6.1.44 Table width
#### 1.6.1.44 Table Width
The width of the table.
#### 1.6.1.45 Table height
#### 1.6.1.45 Table Height
The height of the table.
@ -1941,19 +1941,19 @@ The height of the table.
The tab for selecting image resolution.
#### 1.6.1.47 Use internet camera
#### 1.6.1.47 Use Internet Camera
Enables or disables the use of a network camera.
#### 1.6.1.48 Picture count (work for single host)
#### 1.6.1.48 Picture Count (work For Single Host)
Specifies the number of pictures to be taken.
#### 1.6.1.49 Old camera
#### 1.6.1.49 Old Camera
Indicates whether the old camera is active or inactive.
#### 1.6.1.50 Take X0 image position
#### 1.6.1.50 Take X0 Image Position
The X-axis coordinate for taking a photo.
@ -1961,43 +1961,43 @@ The X-axis coordinate for taking a photo.
#### 1.6.1.51 Take Y0 image position
#### 1.6.1.51 Take Y0 Image Position
The Y-axis coordinate for taking a photo.
#### 1.6.1.52 Take X1 image position
#### 1.6.1.52 Take X1 Image Position
The X-axis coordinate for taking a photo.
#### 1.6.1.53 Take Yl image position
#### 1.6.1.53 Take Yl Image Position
The Y-axis coordinate for taking a photo.
#### 1.6.1.54 Take X2 image position
#### 1.6.1.54 Take X2 Image Position
The X-axis coordinate for taking a photo.
#### 1.6.1.55 Take Y2 image position
#### 1.6.1.55 Take Y2 Image Position
The Y-axis coordinate for taking a photo.
#### 1.6.1.56 Take X3 image position
#### 1.6.1.56 Take X3 Image Position
The X-axis coordinate for taking a photo.
#### 1.6.1.57 Take Y3 image position
#### 1.6.1.57 Take Y3 Image Position
The Y-axis coordinate for taking a photo.
#### 1.6.1.58 Wait time for take picture
#### 1.6.1.58 Wait Time For Take Picture
The waiting time for equipment preparation before taking a picture.
#### 1.6.1.59 Picture Scale for take picture
#### 1.6.1.59 Picture Scale For Take Picture
The scale of the image for saving and importing.
#### 1.6.1.60 Safety above the stone
#### 1.6.1.60 Safety Above The Stone
The safety clearance above the material.
@ -2005,19 +2005,19 @@ The safety clearance above the material.
The thickness of the workbench surface.
#### 1.6.1.62 Plunge into the wood
#### 1.6.1.62 Plunge Into The Wood
The depth of the cutting tool's plunge into the workbench.
#### 1.6.1.63 Under wood table Z position
#### 1.6.1.63 Under Wood Table Z Position
The Z-axis coordinate for the position below the workbench.
#### 1.6.1.64 Stone thickness
#### 1.6.1.64 Stone Thickness
The thickness of the stone material.
#### 1.6.1.65 Vacuum 1 x offset
#### 1.6.1.65 Vacuum 1 X Offset
The X-axis offset of vacuum cup 1 relative to the center of rotation.
@ -2037,55 +2037,55 @@ The width of vacuum cup 1.
The height of vacuum cup 1.
#### 1.6.1.69 Vacuum 2 x offset
#### 1.6.1.69 Vacuum 2 X Offset
The X-axis offset of vacuum cup 2 relative to the center of rotation.
#### 1.6.1.70 Vacuum 2 y offset
#### 1.6.1.70 Vacuum 2 Y Offset
The Y-axis offset of vacuum cup 2 relative to the center of rotation.
#### 1.6.1.71 Vacuum 2 width
#### 1.6.1.71 Vacuum 2 Width
The width of vacuum cup 2.
#### 1.6.1.72 Vacuum 2 height
#### 1.6.1.72 Vacuum 2 Height
The height of vacuum cup 2.
#### 1.6.1.73 Vacuum 3 x offset
#### 1.6.1.73 Vacuum 3 X Offset
The X-axis offset of vacuum cup 3 relative to the center of rotation.
#### 1.6.1.74 Vacuum 3 y offset
#### 1.6.1.74 Vacuum 3 Y Offset
The Y-axis offset of vacuum cup 3 relative to the center of rotation.
#### 1.6.1.75 Vacuum 3 width
#### 1.6.1.75 Vacuum 3 Width
The width of vacuum cup 3.
#### 1.6.1.76 Vacuum 3 height
#### 1.6.1.76 Vacuum 3 Height
The height of vacuum cup 3.
#### 1.6.1.77 Vacuum 4 x offset
#### 1.6.1.77 Vacuum 4 X Offset
The X-axis offset of vacuum cup 4 relative to the center of rotation.
#### 1.6.1.78 Vacuum 4 y offset
#### 1.6.1.78 Vacuum 4 Y Offset
The Y-axis offset of vacuum cup 4 relative to the center of rotation.
#### 1.6.1.79 Vacuum 4 width
#### 1.6.1.79 Vacuum 4 Width
The width of vacuum cup 4.
#### 1.6.1.80 Vacuum 4 height
#### 1.6.1.80 Vacuum 4 Height
The height of vacuum cup 4.
#### 1.6.1.81 Vacuum 5 x offset
#### 1.6.1.81 Vacuum 5 X Offset
The X-axis offset of vacuum cup 5 relative to the center of rotation.
@ -2093,51 +2093,51 @@ The X-axis offset of vacuum cup 5 relative to the center of rotation.
#### 1.6.1.82 Vacuum 6 x offset
#### 1.6.1.82 Vacuum 6 X Offset
The X-axis offset of vacuum cup 6 relative to the center of rotation.
#### 1.6.1.83 Vacuum 6 y offset
#### 1.6.1.83 Vacuum 6 Y Offset
The Y-axis offset of vacuum cup 6 relative to the center of rotation.
#### 1.6.1.84 Vacuum 6 width
#### 1.6.1.84 Vacuum 6 Width
The width of vacuum cup 6.
#### 1.6.1.85 Vacuum 6 height
#### 1.6.1.85 Vacuum 6 Height
The height of vacuum cup 6.
#### 1.6.1.86 Vacuum 7 x offset
#### 1.6.1.86 Vacuum 7 X Offset
The X-axis offset of vacuum cup 7 relative to the center of rotation.
#### 1.6.1.87 Vacuum 7 y offset
#### 1.6.1.87 Vacuum 7 Y Offset
The Y-axis offset of vacuum cup 7 relative to the center of rotation.
#### 1.6.1.88 Vacuum 7 width
#### 1.6.1.88 Vacuum 7 Width
The width of vacuum cup 7.
#### 1.6.1.89 Vacuum 7 height
#### 1.6.1.89 Vacuum 7 Height
The height of vacuum cup 7.
#### 1.6.1.90 Vacuum 8 x offset
#### 1.6.1.90 Vacuum 8 X Offset
The X-axis offset of vacuum cup 8 relative to the center of rotation.
#### 1.6.1.91 Vacuum 8 y offset
#### 1.6.1.91 Vacuum 8 Y Offset
The Y-axis offset of vacuum cup 8 relative to the center of rotation.
#### 1.6.1.92 Vacuum 8 width
#### 1.6.1.92 Vacuum 8 Width
The width of vacuum cup 8.
#### 1.6.1.93 Vacuum 8 height
#### 1.6.1.93 Vacuum 8 Height
The height of vacuum cup 8.
@ -2161,11 +2161,11 @@ The feed rate for raising the material using vacuum cups.
#### 1.6.1.98 Z Min for Kins 2
#### 1.6.1.98 Z Min For Kins 2
The minimum Z-axis limit for Kinematics 2.
#### 1.6.1.99 Z Safe for Kins 1
#### 1.6.1.99 Z Safe For Kins 1
The safe Z-axis position for Kinematics 1.
@ -2177,19 +2177,19 @@ The Z-axis coordinate for starting the material thickness probe sequence.
The Z-axis coordinate for ending the material thickness probe sequence.
#### 1.6.1.102 Slab Probe to Laser X Position
#### 1.6.1.102 Slab Probe To Laser X Position
The X-axis offset between the slab probe and the laser cross position.
#### 1.6.1.103 Slab Probe to Laser Y Position
#### 1.6.1.103 Slab Probe To Laser Y Position
The Y-axis offset between the slab probe and the laser cross position.
#### 1.6.1.104 Slab Probe to Blade X Position
#### 1.6.1.104 Slab Probe To Blade X Position
The X-axis offset between the slab probe and the blade.
#### 1.6.1.105 Slab Probe to Blade Y Position
#### 1.6.1.105 Slab Probe To Blade Y Position
The Y-axis offset between the slab probe and the blade.
@ -2213,11 +2213,11 @@ Specifies the length of incremental movements during manual operation.
The number of lines to ignore at the head of a SEGC file during import.
#### 1.6.1.111 SEGC File tail Ignore Count
#### 1.6.1.111 SEGC File Tail Ignore Count
The number of lines to ignore in the tail section of a SEGC file during import.
#### 1.6.1.112 Rotate Angle of Pick Photos
#### 1.6.1.112 Rotate Angle Of Pick Photos
The rotation angle applied to photos during image capture.
@ -2237,7 +2237,7 @@ The waiting time for high-pressure buildup.
The delay time before closing the valve after the pump stops operating.
#### 1.6.1.116 Pressure of Waterjet Manual Cutting
#### 1.6.1.116 Pressure Of Waterjet Manual Cutting
Sets the waterjet pressure for manual operations.
@ -2253,35 +2253,35 @@ Correction value for tool wear along the Z-axis.
The identification number for the remote control connection.
#### 1.6.1.120 The Input Pin of Remote Status
#### 1.6.1.120 The Input Pin Of Remote Status
UI<=CNC Input Data Signal: Indicates the switch position of the remote control.
#### 1.6.1.121 The Input Pin of TCP Status
#### 1.6.1.121 The Input Pin Of TCP Status
UI<=CNC Input Data Signal: Indicates the switch position for axis interpolation on the operator panel.
#### 1.6.1.122 The Output Pin for TCP Light
#### 1.6.1.122 The Output Pin For TCP Light
UI=>CNC Output Signal: Indicates the activation of the axis interpolation switch light.
#### 1.6.1.123 The Input Pin of Increase Move 45°
#### 1.6.1.123 The Input Pin Of Increase Move 45°
UI<=CNC Input Data Signal: Detects the switch position for incrementally rotating the B axis by 45°.
#### 1.6.1.124 The Input Pin of Increase Move 90°
#### 1.6.1.124 The Input Pin Of Increase Move 90°
UI<=CNC Input Data Signal: Detects the switch position for incrementally rotating the B axis by 90°.
#### 1.6.1.125 The Pin of Water Alarm
#### 1.6.1.125 The Pin Of Water Alarm
UI<=CNC Input Data Signal: Indicates the absence of water pressure in the input pipeline of the machine.
#### 1.6.1.126 The Output Pin of Taking Photo
#### 1.6.1.126 The Output Pin Of Taking Photo
UI=>CNC Output Data Signal: Activates the camera action to take a photo of the material on the workbench.
#### 1.6.1.127 The Output Pin of Finish Made Photo
#### 1.6.1.127 The Output Pin Of Finish Made Photo
UI=>CNC Output Data Signal: Indicates that the camera has completed taking a photo of the material on the workbench.
@ -2289,57 +2289,57 @@ UI=>CNC Output Data Signal: Indicates that the camera has completed taking a pho
#### 1.6.1.128 The Output Pin of Reset Camera
#### 1.6.1.128 The Output Pin Of Reset Camera
UI<=CNC Input Data Signal: Indicates that the camera reset button has been pressed to reboot and reconnect the camera.
#### 1.6.1.129 The Input Pin of Spindle Run Status
#### 1.6.1.129 The Input Pin Of Spindle Run Status
UI<=CNC Input Data Signal: Indicates that the spindle is running and ready for operation.
#### 1.6.1.130 The Analogic Pin of Spindle Speed
#### 1.6.1.130 The Analogic Pin Of Spindle Speed
Analog output pin directly transmits the spindle's rotation speed from the CNC digital output.
#### 1.6.1.131 The Input Pin of Waterjet Run Status
#### 1.6.1.131 The Input Pin Of Waterjet Run Status
UI<=CNC Input Data Signal: Indicates that the waterjet pump is running and ready for operation.
#### 1.6.1.132 The Analogic Pin of Total Waste
#### 1.6.1.132 The Analogic Pin Of Total Waste
#### 1.6.1.133 The Analogic Pin of Z Waste
#### 1.6.1.133 The Analogic Pin Of Z Waste
#### 1.6.1.134 The Analogic Pin of Amp
#### 1.6.1.134 The Analogic Pin Of Amp
Analog output pin directly transmits the spindle load (amps) from the CNC digital output.
#### 1.6.1.135 The HALIO Analogic Output Pin of Tool Removal
#### 1.6.1.135 The HALIO Analogic Output Pin Of Tool Removal
HALIO reference to the virtual interface signal. UI=>CNC Output Data Signal: Indicates the absence of a tool.
#### 1.6.1.136 The HALIO Analogic Output Pin of Main Tool Type
#### 1.6.1.136 The HALIO Analogic Output Pin Of Main Tool Type
HALIO reference to the virtual interface signal. UI=>CNC Output Data Signal: Indicates the type of the main installed tool.
#### 1.6.1.137 The HALIO Analogic Output Pin of Second Tool Type
#### 1.6.1.137 The HALIO Analogic Output Pin Of Second Tool Type
HALIO reference to the virtual interface signal. UI=>CNC Output Data Signal: Indicates the type of the second installed tool.
#### 1.6.1.138 The HALIO Analogic Output Pin of Second Tool Number
#### 1.6.1.138 The HALIO Analogic Output Pin Of Second Tool Number
HALIO reference to the virtual interface signal. UI=>CNC Output Data Signal: Indicates the number of the second installed tool.
#### 1.6.1.139 The HALIO Input Pin for Skip Process
#### 1.6.1.139 The HALIO Input Pin For Skip Process
#### 1.6.1.140 The Pin for Cross Laser
#### 1.6.1.140 The Pin For Cross Laser
UI<=CNC Input Data Signal: Indicates the activation and usage of the cross laser.
#### 1.6.1.141 The Pin for Pick Point
#### 1.6.1.141 The Pin For Pick Point
UI<=CNC Input Data Signal: Indicates the retrieval of a point from the cross laser's position.
#### 1.6.1.142 The Pin for Reload Tools
#### 1.6.1.142 The Pin For Reload Tools
UI<=CNC Input Data Signal: Indicates the need to change the installed tool to complete the operation.
@ -2347,59 +2347,59 @@ UI<=CNC Input Data Signal: Indicates the need to change the installed tool to co
#### 1.6.1.143 The Input Pin of X Jog Plus
#### 1.6.1.143 The Input Pin Of X Jog Plus
UI<=CNC Input Data Signal: Incremental jog movement in the positive X-axis direction.
#### 1.6.1.144 The Input Pin of Y Jog Plus
#### 1.6.1.144 The Input Pin Of Y Jog Plus
UI<=CNC Input Data Signal: Incremental jog movement in the positive Y-axis direction.
#### 1.6.1.145 The Input Pin of Z Jog Plus
#### 1.6.1.145 The Input Pin Of Z Jog Plus
UI<=CNC Input Data Signal: Incremental jog movement in the positive Z-axis direction.
#### 1.6.1.146 The Input Pin of B Jog Plus
#### 1.6.1.146 The Input Pin Of B Jog Plus
UI<=CNC Input Data Signal: Incremental jog movement in the positive B-axis direction.
#### 1.6.1.147 The Input Pin of C Jog Plus
#### 1.6.1.147 The Input Pin Of C Jog Plus
UI<=CNC Input Data Signal: Incremental jog movement in the positive C-axis direction.
#### 1.6.1.148 The Input Pin of U Jog Plus
#### 1.6.1.148 The Input Pin Of U Jog Plus
UI<=CNC Input Data Signal: Incremental jog movement in the positive U-axis direction.
#### 1.6.1.149 The Input Pin of X Jog Minus
#### 1.6.1.149 The Input Pin Of X Jog Minus
UI<=CNC Input Data Signal: Incremental jog movement in the negative X-axis direction.
#### 1.6.1.150 The Input Pin of Y Jog Minus
#### 1.6.1.150 The Input Pin Of Y Jog Minus
UI<=CNC Input Data Signal: Incremental jog movement in the negative Y-axis direction.
#### 1.6.1.151 The Input Pin of Z Jog Minus
#### 1.6.1.151 The Input Pin Of Z Jog Minus
UI<=CNC Input Data Signal: Incremental jog movement in the negative Z-axis direction.
#### 1.6.1.152 The Input Pin of B Jog Minus
#### 1.6.1.152 The Input Pin Of B Jog Minus
UI<=CNC Input Data Signal: Incremental jog movement in the negative B-axis direction.
#### 1.6.1.153 The Input Pin of C Jog Minus
#### 1.6.1.153 The Input Pin Of C Jog Minus
UI<=CNC Input Data Signal: Incremental jog movement in the negative C-axis direction.
#### 1.6.1.154 The Output Pin of Laser
#### 1.6.1.154 The Output Pin Of Laser
UI=>CNC Output Data Signal: Indicates the activation of the laser line.
#### 1.6.1.155 The Output Pin of Reset EtherCAT Faults
#### 1.6.1.155 The Output Pin Of Reset Ethercat Faults
UI<=CNC Input Data Signal: Indicates that the operator has reset the EtherCAT faults.
#### 1.6.1.156 The Input Pin of Set Stone Thickness
#### 1.6.1.156 The Input Pin Of Set Stone Thickness
UI<=CNC Input Data Signal: Indicates the stone thickness value set in the parameters.
@ -2407,15 +2407,15 @@ UI<=CNC Input Data Signal: Indicates the stone thickness value set in the parame
#### 1.6.1.157 The Analogic Pin of Set Stone Thickness
#### 1.6.1.157 The Analogic Pin Of Set Stone Thickness
Analog output directly receiving the stone thickness value from the CNC after probing.
#### 1.6.1.158 The Input Pin of Set Tool Diameter
#### 1.6.1.158 The Input Pin Of Set Tool Diameter
UI<=CNC Input Data Signal: Indicates the tool diameter set in the parameters.
#### 1.6.1.159 The Analogic Pin of Set Tool Diameter
#### 1.6.1.159 The Analogic Pin Of Set Tool Diameter
Analog output directly receiving the tool diameter value from the CNC after probing.
@ -2423,15 +2423,15 @@ Analog output directly receiving the tool diameter value from the CNC after prob
#### 1.6.1.160 Vacuum 5 y offset
#### 1.6.1.160 Vacuum 5 Y Offset
The Y-axis offset of vacuum cup 5 relative to the center of rotation.
#### 1.6.1.161 Vacuum 5 width
#### 1.6.1.161 Vacuum 5 Width
The width of vacuum cup 5.
#### 1.6.1.162 Vacuum 5 height
#### 1.6.1.162 Vacuum 5 Height
The height of vacuum cup 7.
@ -2440,7 +2440,7 @@ The height of vacuum cup 7.
Settings for the 3D preview format.
#### 1.6.2.1 List of Kinematics
#### 1.6.2.1 List Of Kinematics
A list of elements for configuring the machine's kinematics.
@ -2468,15 +2468,15 @@ Button for deleting the selected parameter row.
Specifies the table number for kinematics configuration (-1 by default).
##### 1.6.2.3.2 Rotate by X Axis
##### 1.6.2.3.2 Rotate By X Axis
Selects the value for rotation around the X-axis (not assigned).
##### 1.6.2.3.3 Rotate by Y Axis
##### 1.6.2.3.3 Rotate By Y Axis
Selects the value for rotation around the Y-axis (not assigned).
##### 1.6.2.3.4 Rotate by Z Axis
##### 1.6.2.3.4 Rotate By Z Axis
Selects the value for rotation around the Z-axis (not assigned).
@ -2494,15 +2494,15 @@ Saves the changes made to the configuration settings.
Specifies the table number for kinematics configuration (default is 0).
##### 1.6.2.4.2 Rotate by X Axis
##### 1.6.2.4.2 Rotate By X Axis
Selects the value (A) for rotation around the X-axis.
##### 1.6.2.4.3 Rotate by Y Axis
##### 1.6.2.4.3 Rotate By Y Axis
Selects the value (B) for rotation around the Y-axis.
##### 1.6.2.4.4 Rotate by Z Axis
##### 1.6.2.4.4 Rotate By Z Axis
Selects the value (C) for rotation around the Z-axis.
@ -2518,7 +2518,7 @@ Saves the changes made to the configuration settings.
#### 1.6.3.1 List of values for the 3D preview
#### 1.6.3.1 List Of Values For The 3D Preview
#### 1.6.3.2 Add
@ -2540,9 +2540,9 @@ Saves the changes made to the configuration settings.
#### 1.6.4.1 Minutes before pumping grease
#### 1.6.4.1 Minutes Before Pumping Grease
#### 1.6.4.2 Minutes to pump grease
#### 1.6.4.2 Minutes To Pump Grease
#### 1.6.4.3 Save Self Motor Homing
@ -2552,29 +2552,29 @@ Saves the changes made to the configuration settings.
#### 1.6.5.1 Tool Table path
#### 1.6.5.1 Tool Table Path
#### 1.6.5.2 Position Table path
#### 1.6.5.2 Position Table Path
#### 1.6.5.3 Var File path
#### 1.6.5.3 Var File Path
#### 1.6.5.4 Subroutine path
#### 1.6.5.4 Subroutine Path
#### 1.6.5.5 ini File path
#### 1.6.5.5 Ini File Path
#### 1.6.5.6 bnc file folder
#### 1.6.5.6 Bnc File Folder
## 1.7 Tools
### 1.7.1 Tool tab
### 1.7.1 Tool Tab
#### 1.7.1.1 Tools List
#### 1.7.1.2 Add tool
#### 1.7.1.2 Add Tool
[**Tool management**](#h-1217-edit-tool)
@ -2586,11 +2586,11 @@ Saves the changes made to the configuration settings.
#### 1.7.1.5 Delete
### 1.7.2 Position tab
### 1.7.2 Position Tab
#### 1.7.2.1 Position list
#### 1.7.2.1 Position List
#### 1.7.2.2 Add Position
@ -2598,9 +2598,9 @@ Saves the changes made to the configuration settings.
##### 1.7.2.3.1 Tool position tab
##### 1.7.2.3.1 Tool Position Tab
###### 1.7.2.3.1.1 Position number(P)
###### 1.7.2.3.1.1 Position Number(p)
###### 1.7.2.3.1.2 X
@ -2638,7 +2638,7 @@ Saves the changes made to the configuration settings.
###### 1.7.2.3.1.19 W Safe
##### 1.7.2.3.2 Tool change position figure
##### 1.7.2.3.2 Tool Change Position Figure
##### 1.7.2.3.3 Cancel
@ -2666,11 +2666,11 @@ Saves the changes made to the configuration settings.
#### 1.8.3.1 Linguist
#### 1.8.3.2 Linguist with English
#### 1.8.3.2 Linguist With English
#### 1.8.3.3 Linguist with Chinese
#### 1.8.3.3 Linguist With Chinese
#### 1.8.3.4 Linguist with Italian
#### 1.8.3.4 Linguist With Italian
### 1.8.4 VNC
@ -2678,7 +2678,7 @@ Saves the changes made to the configuration settings.
### 1.8.4.1 VNC
#### 1.8.4.2 CNC: ip
#### 1.8.4.2 CNC: IP
### 1.8.5 Update
@ -2700,7 +2700,7 @@ Saves the changes made to the configuration settings.
## 1.9 Machine
## 1.10 Status and Control Panel
## 1.10 Status And Control Panel
@ -2720,9 +2720,9 @@ Saves the changes made to the configuration settings.
### 1.10.8 Zoom In
### 1.10.9 Rotation mode toggle
### 1.10.9 Rotation Mode Toggle
### 1.10.10 Clean plot
### 1.10.10 Clean Plot
### 1.10.11 Spindle Override
@ -2750,4 +2750,4 @@ Saves the changes made to the configuration settings.
